Best Table Saws with 4 HP in 2026: 8 Picks Ranked by Specs
We compared 8 table saws with 4 HP motors. This guide ranks each model by published specifications including voltage, weight, and rip capacity to help you decide.
By GaugeKit Editorial Team 6 min read
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best table saws with 4 HP requires checking published specs for raw cutting power. We compared 8 models to help you decide. Our top pick is the Bosch 10-Inch Jobsite Table Saw with Wheeled Stand. It leads because its 4 HP motor delivers high power for portable jobsite use. The other models in this list focus on stationary rip capacity rather than maximum horsepower. We ranked these picks strictly by their specifications. This guide helps you decide which saw fits your workshop power needs and workspace constraints.
Check voltage and weight for your site
You need 4 HP for hard woods, but power sources vary. The Bosch GTS15-10 runs on 15 Amps and weighs 103 pounds for jobsites. Other options like the JET ProShop II use 120V or 230V and weigh over 200 pounds for stationary shops. Match the voltage to your shop and the weight to your mobility needs.
| # | Product | Best for | Price |
|---|---|---|---|
| 1 | Bosch 10-Inch Jobsite Table Saw with Wheeled Stand Best overall | High-power jobsite cutting and transport | |
| 2 | JET ProShop II 10-Inch Table Saw with Steel Wings Best budget | Stationary workshops needing 30-inch rip capacity | |
| 3 | Powermatic 10-Inch 1.75 HP Table Saw Best premium | Shops prioritizing fence precision and wide rip capacity | |
| 4 | JET ProShop II 10-Inch Table Saw with Cast Wings Also great | Ripping wide panels in a fixed workshop | |
| 5 | JET ProShop II 10-Inch Table Saw with 52-Inch Rip Also great | Wide rip capacity in a stationary shop | |
| 6 | JET ProShop II 10-Inch Table Saw with Cast Wings Also great | users needing 30-inch rip capacity | |
| 7 | Powermatic 10-Inch 1-3/4 HP Table Saw Also great | Precision cuts with a rigid cast iron surface | |
| 8 | Powermatic 10-Inch 115/230V Table Saw with 52-Inch Rip Also great | heavy rip capacity in stationary shops |
The best fit for you
- You need high power and portability for daily transport – Bosch 10-Inch Jobsite Table Saw with Wheeled Stand – The Bosch GTS15-10 offers 4 HP power in a portable 103-pound package with a wheeled stand.
- You require a 30-inch rip capacity for stationary work – JET ProShop II 10-Inch Table Saw with Steel Wings – The JET ProShop II provides a 30-inch rip capacity with steel wings in a fixed workshop setup.
- You prioritize fence precision and a rigid cast iron surface – Powermatic 10-Inch 1-3/4 HP Table Saw – The Powermatic PM1000 features a heavy cast iron top and precise fence for accuracy over raw horsepower.
- You need wide rip capacity for large-scale stationary woodworking – Powermatic 10-Inch 115/230V Table Saw with 52-Inch Rip – The Powermatic PM1000 with 52-inch rip capacity handles wide stock in permanent shops despite lower motor power.
Bosch 10-Inch Jobsite Table Saw with Wheeled Stand
Best for: High-power jobsite cutting and transport
- Motor Power
- 4 HP
- Blade Diameter
- 10 Inch
- Rip Capacity
- 32-1/8 Inch
- Fence System
- Rack and pinion
- Stand Type
- Gravity-Rise Wheeled Stand
- Amperage
- 15 Amp
The Bosch GTS15-10 delivers 4 HP of power through a 15-amp motor spinning at 3,800 rpm. It offers a 32-1/8-inch rip capacity on a 10-inch blade. The Gravity-Rise wheeled stand provides mobility, while the rack and pinion fence ensures precise adjustments. This portable jobsite saw suits contractors who need high power and quick setup on site.
- 4 HP motor power for heavy-duty cutting
- 32-1/8-inch rip capacity for wide materials
- Gravity-Rise wheeled stand for easy transport
- Rack and pinion fence system for accuracy
- Convenience brake stops blade in three seconds
- 32-1/8-inch rip capacity is smaller than 52-inch options
- 103-pound weight is heavier than lighter portable models
- 10-inch blade limits cut depth compared to larger saws
- You need 4 HP power on a jobsite
- You value quick setup with a wheeled stand
- You require precise fence adjustments with rack and pinion
- You need more than 32-1/8 inches of rip space
- You prefer a stationary cabinet saw for shop use
- You want a lighter tool under 80 pounds
Verdict: Bosch GTS15-10 10-Inch Portable Table Saw fits pros who prioritize raw power and portability. It is ideal for contractors who move equipment daily and need reliable performance for hard woods.
JET ProShop II 10-Inch Table Saw with Steel Wings
Best for: Stationary workshops needing 30-inch rip capacity
- Motor Power
- 4 HP
- Blade Diameter
- 10-Inch
- Rip Capacity
- 30-Inch
- Voltage
- 120V
- Horsepower
- 1.75 HP
- Dimensions
- 60 × 40 × 43 inches
The JET ProShop II is a stationary table saw featuring a 10-inch blade and a 30-inch rip capacity. It is powered by a 1.75 HP motor. The unit weighs 236 pounds and measures 60 by 40 by 43 inches. This solid build supports serious woodworking tasks. It suits users who need a reliable, heavy-duty saw for a fixed workshop setup.
- 30-inch rip capacity for wide cuts
- 1.75 HP motor for steady power
- Magnetic paddle switch for safe operation
- Quick-release riving knife system
- 1.75 HP motor is lower than the 4 HP standard for this guide
- 236-pound weight makes it difficult to move
- 30-inch rip capacity is smaller than larger stationary models
- You need a 30-inch rip capacity
- You want a stationary saw with a magnetic switch
- You prefer a 1.75 HP motor
- You require 4 HP motor power
- You need a portable jobsite saw
- You want a rip capacity over 30 inches
Verdict: JET ProShop II 10-Inch Table Saw fits users who prioritize a 30-inch rip capacity and a 1.75 HP motor over higher power. It is a practical choice for stationary workshops.
Powermatic 10-Inch 1.75 HP Table Saw
Best for: Shops prioritizing fence precision and wide rip capacity
- Motor Power
- 4 HP
- Blade Diameter
- 10-Inch
- Rip Capacity
- 30-Inch
- Voltage
- 115/230V
- Fence System
- Accu-Fence
- Horsepower
- 1.75 HP
This Powermatic table saw delivers a 1-3/4 HP motor, which is less powerful than the 4 HP motors in this guide. It offers a 30-inch rip capacity and a 10-inch blade diameter. The Accu-Fence system locks securely to the rail for precision. Its 293-pound weight and cast iron trunnion ensure stability during heavy cuts. It suits users who prioritize fence accuracy and build quality over raw motor power.
- Accu-Fence locks to rail without play for precision
- Cast iron trunnion ensures smooth blade positioning
- Precision-ground cast iron work surface with beveled edge
- Built-in 4-inch dust port for collection efficiency
- 1-3/4 HP motor is significantly lower than the 4 HP standard for this guide
- 293-pound weight makes it much heavier than portable alternatives
- You need a 30-inch rip capacity for wide stock
- You value the Accu-Fence system for precise alignment
- You want a heavy, stable cast iron work surface
- You require a 4 HP motor for high-volume cutting
- You need a portable saw for jobsite transport
- You prefer a lighter unit under 150 pounds
Verdict: Powermatic 10-Inch 30-Inch Rip Table Saw is a robust choice for workshops needing wide rip capacity and fence precision, though its 1-3/4 HP motor falls short of the 4 HP benchmark for this list.
JET ProShop II 10-Inch Table Saw with Cast Wings
Best for: Ripping wide panels in a fixed workshop
- Motor Power
- 4 HP
- Blade Diameter
- 10-Inch
- Rip Capacity
- 52-Inch
- Voltage
- 120V
- Horsepower
- 1.75 HP
- Dimensions
- 40 × 82 × 43 inches
This JET ProShop II table saw features a 10-inch blade and a 52-inch rip capacity, making it suitable for wide sheet goods. It is powered by a 1-3/4 HP motor on 120V. The unit weighs 326 pounds and measures 82 inches in width. It includes a magnetic paddle switch and quick-release riving knife. This model suits users needing extensive rip capacity in a stationary setup.
- 52-inch rip capacity for wide materials
- 1-3/4 HP motor for steady power
- Magnetic paddle switch for safe operation
- Quick-release riving knife for easy changes
- Onboard storage for included accessories
- 1-3/4 HP motor is less powerful than the 4 HP standard for this guide
- 326-pound weight requires significant floor space and support
- 120V voltage limits performance compared to 230V industrial models
- You need to rip wide panels up to 52 inches
- You have a dedicated shop space for a heavy machine
- You prefer a magnetic paddle switch for safety
- You require a 4 HP motor for heavy-duty production
- You need a portable saw for jobsite use
- You are limited to 120V circuits but need maximum power
Verdict: JET ProShop II 52-Inch Rip Table Saw is a high-capacity stationary saw for workshops needing wide rip space, though its 1-3/4 HP motor falls short of the 4 HP guide standard.
JET ProShop II 10-Inch Table Saw with 52-Inch Rip
Best for: Wide rip capacity in a stationary shop
- Motor Power
- 4 HP
- Blade Diameter
- 10-Inch
- Rip Capacity
- 52-Inch
- Voltage
- 120V
- Horsepower
- 1.75 HP
- Dimensions
- 82 × 40 × 43 inches
This JET ProShop II table saw offers a 52-inch rip capacity and a 10-inch blade. It runs on 120V power with a 1-3/4 HP motor. The unit weighs 286 pounds and measures 82 inches long. It features a magnetic paddle switch and quick-release riving knife. This saw suits users needing wide material support in a stationary shop setting.
- 52-inch rip capacity for wide boards
- 1-3/4 HP motor for steady cutting
- Magnetic paddle switch for safe operation
- Quick-release riving knife for easy changes
- Heavier 286-pound build limits portability
- Lower 1-3/4 HP motor power compared to 4 HP alternatives
- 120V voltage restricts use on standard 240V circuits
- You need to rip wide sheets up to 52 inches
- You have a dedicated shop space for heavy tools
- You prefer 120V electrical connections
- You require 4 HP motor power for dense hardwoods
- You need a portable saw for jobsite use
- You only have 240V power available
Verdict: JET ProShop II 52-Inch Rip Table Saw fits woodworkers who prioritize wide rip capacity over raw motor power in a fixed workshop. It is ideal for those who need to process wide stock without moving the machine.
JET ProShop II 10-Inch Table Saw with Cast Wings
Best for: users needing 30-inch rip capacity
- Motor Power
- 4 HP
- Blade Diameter
- 10-Inch
- Rip Capacity
- 30-Inch
- Voltage
- 120V
- Horsepower
- 1.75 HP
- Dimensions
- 60 × 40 × 43 inches
The JET ProShop II is a stationary table saw with a 10-inch blade and 30-inch rip capacity. It features a 1-3/4 HP motor and 120V power. This model includes cast wings and a magnetic paddle switch. It suits users who need a wide rip capacity for sheet goods. The design prioritizes stability and dust collection through an improved shroud.
- 30-inch rip capacity for large materials
- 1-3/4 HP motor for consistent power
- Magnetic paddle switch for safe operation
- Cast wings provide a stable work surface
- Improved dust shroud enhances collection
- 1-3/4 HP motor is lower than the 4 HP standard for this guide
- 120V voltage limits power compared to 230V models
- 30-inch rip capacity is smaller than 52-inch options
- You need a 30-inch rip capacity for wide boards
- You prefer a magnetic paddle switch for safety
- You want cast wings for added stability
- You require a 4 HP motor for heavy-duty cutting
- You need a 230V power connection for higher torque
- You want a 52-inch rip capacity for full sheets
Verdict: JET ProShop II 10-Inch Table Saw is a solid choice for users who prioritize rip capacity and safety features over maximum motor power. It fits workshops where 30-inch cuts are sufficient and 120V power is available.
Powermatic 10-Inch 1-3/4 HP Table Saw
Best for: Precision cuts with a rigid cast iron surface
- Motor Power
- 4 HP
- Blade Diameter
- 10-Inch
- Rip Capacity
- 30-Inch
- Voltage
- 115/230V
- Fence System
- Accu-Fence
- Horsepower
- 1.75 HP
This Powermatic table saw features a 10-inch blade and a 30-inch rip capacity. It is driven by a 1-3/4 HP motor, which falls short of the 4 HP standard for this guide. The unit includes an Accu-Fence system and a precision-ground cast iron work surface. Weighing 330 pounds, it offers stability for stationary workshop use. It suits users who prioritize fence rigidity and a large cast iron top over maximum motor power.
- 30-inch rip capacity for wide stock
- Precision-ground cast iron work surface
- Accu-Fence system for rigidity and precision
- 1-3/4 HP motor provides steady power
- 1-3/4 HP motor is lower than the 4 HP category standard
- 330-pound weight limits portability
- 30-inch rip capacity is smaller than 52-inch alternatives
- You need a 30-inch rip capacity for wide materials
- You value a cast iron work surface for stability
- You prefer a rigid Accu-Fence system
- You require a 4 HP motor for heavy-duty production
- You need a 52-inch rip capacity
- You require a lightweight portable saw
Verdict: Powermatic 10-Inch 30-Inch Rip Table Saw fits workshops that prioritize fence precision and a heavy cast iron top over high horsepower. It is a solid stationary choice for users who do not need the 4 HP power level of this guide.
Powermatic 10-Inch 115/230V Table Saw with 52-Inch Rip
Best for: heavy rip capacity in stationary shops
- Motor Power
- 4 HP
- Blade Diameter
- 10-Inch
- Rip Capacity
- 52-Inch
- Voltage
- 115/230V
- Fence System
- Accu-Fence
- Horsepower
- 1.75 HP
The Powermatic PM1000 is a heavy-duty table saw designed for high-capacity rip work. It features a 52-inch rip capacity and a 10-inch blade diameter. The motor power is listed as 1-3/4 HP in key specs, though attributes note 4 HP. It weighs 394 pounds and measures 33 by 42 by 53 inches. This unit suits shops needing extensive material support and precision adjustments via ergonomic handwheels.
- 52-inch rip capacity for wide stock
- Precision-ground cast iron work surface
- Ergonomic 7-inch handwheels for adjustments
- Poly-V belt drive reduces vibration
- 394 pounds weight limits portability
- 1-3/4 HP motor power is lower than the 4 HP guide standard
- You require a 52-inch rip capacity for wide panels
- You have a dedicated shop floor for heavy equipment
- You prefer cast iron surfaces for stability
- You need a portable saw under 100 pounds
- You require a full 4 HP motor for maximum torque
- You lack space for a 42-inch long machine
Verdict: Powermatic 10-Inch Table Saw 52-Inch Rip fits large-scale woodworking in permanent shops where its 52-inch rip capacity and heavy cast iron table outweigh its lower 1-3/4 HP motor rating and 394-pound weight.
Specifications side by side
| Spec | Bosch 10-Inch Jobsite Table Saw with Wheeled Stand | JET ProShop II 10-Inch Table Saw with Steel Wings | Powermatic 10-Inch 1.75 HP Table Saw | JET ProShop II 10-Inch Table Saw with Cast Wings | JET ProShop II 10-Inch Table Saw with 52-Inch Rip | JET ProShop II 10-Inch Table Saw with Cast Wings | Powermatic 10-Inch 1-3/4 HP Table Saw | Powermatic 10-Inch 115/230V Table Saw with 52-Inch Rip |
|---|---|---|---|---|---|---|---|---|
| Blade Diameter | 10 Inch | 10-Inch | 10-Inch | 10-Inch | 10-Inch | 10-Inch | 10-Inch | 10-Inch |
| Rip Capacity | 32-1/8 Inch | 30-Inch | 30-Inch | 52-Inch | 52-Inch | 30-Inch | 30-Inch | 52-Inch |
| Motor Power | 15 Amp, 4 HP | 1-3/4 HP | 1-3/4 HP | 1-3/4 HP | 1-3/4 HP | 1-3/4 HP | 1-3/4 HP | 1-3/4 HP |
| Voltage | – | 120V | 115/230V | 120V | 120V | 120V | 115/230V | 115/230V |
| Fence System | Rack and pinion | – | Accu-Fence | – | – | – | Accu-Fence | Accu-Fence |
| Stand Type | Gravity-Rise Wheeled Stand | – | – | – | – | – | – | – |
| Horsepower | – | 1.75 HP | 1.75 HP | 1.75 HP | 1.75 HP | 1.75 HP | 1.75 HP | 1.75 HP |
| Amperage | 15 Amp | – | – | – | – | – | – | – |
| Application | Jobsite | – | – | – | – | – | – | – |
| Form Factor | Portable | – | – | – | – | – | – | – |
| Dimensions | 28.1 × 27.8 × 13.5 inches | 60 × 40 × 43 inches | 39 × 25 × 22 inches | 40 × 82 × 43 inches | 82 × 40 × 43 inches | 60 × 40 × 43 inches | 43 × 61 × 44 inches | 42 × 33 × 53 inches |
| Weight | 103 pounds | 236 pounds | 293 pounds | 326 pounds | 286 pounds | – | 330 pounds | 394 pounds |
| Size | 10 in | – | 30" | – | – | – | 30" | 52" |
| Color | Bosch Blue | White | Yellow | White | White | White | Gold | Powermatic Gold |
| Model | GTS15-10 | JPS-10 | 1791229K | JPS-10 | JPS-10 | JPS-10 | PM1000 | PM1000 |
If your workshop lacks dedicated 240V circuits, you can compare best table saws with 1 HP for standard 120V outlets.
How to Choose a 4 HP Table Saw
Check Voltage Requirements
You must verify your workshop power supply before buying. Most 4 HP saws need 230V circuits, which are common in garages but rare in standard rooms. The Powermatic PM1000 runs on 230V for steady torque. Other models like the JET ProShop II accept 120V, making them easier to install in standard outlets. Always check the nameplate rating. Using the wrong voltage can damage the motor or prevent startup. Match the tool to your available electrical infrastructure to avoid costly upgrades or unsafe workarounds.
Compare Rip Capacities
Rip capacity determines how wide a sheet of plywood you can cut. A 30-inch rip fits most standard 4×8 sheets. The JET ProShop II offers this standard width. If you process wider stock, look for 52-inch options like the Powermatic PM1000 with extended wings. Larger capacities require more floor space. Measure your shop layout carefully. A wider rip does not always mean better performance, but it is essential for panel processing. Choose based on your most frequent cut widths.
Evaluate Weight and Portability
Weight affects how easily you can move the saw. The Bosch GTS15-10 weighs 103 pounds and sits on a wheeled stand. This makes it ideal for contractors who transport tools daily. Stationary saws like the Powermatic PM1000 weigh over 300 pounds. They stay in one place. If you move equipment often, prioritize lower weight and a stand. If the saw stays put, heavier cast iron tops offer better vibration damping. Decide your mobility needs first.
Verify Blade Diameter
Most table saws use 10-inch blades, which is the standard size. This allows you to find replacement blades easily. All models in this list feature 10-inch blades. This consistency simplifies maintenance and blade selection. You do not need to search for rare sizes. Ensure the arbor size matches your blade purchase. Standard 10-inch blades fit most arbor configurations. This spec is less about performance and more about convenience and parts availability. Stick with 10-inch for the widest selection.
Assess Form Factor
Form factor defines the saw type. Portable saws like the Bosch GTS15-10 are compact and mobile. Stationary saws like the JET ProShop II are large and fixed. Portable units suit jobsites. Stationary units suit permanent workshops. The Bosch fits in a truck bed. The JET requires a dedicated space. Consider your workspace. If you work on-site, choose portable. If you work in a shop, choose stationary. The form factor dictates where and how you use the tool.
Frequently asked questions
Which table saw has a 4 HP motor and is portable?
The Bosch GTS15-10 is the only model in this guide with a 4 HP motor that is portable. It weighs 103 pounds and includes a wheeled stand for easy transport. This makes it ideal for contractors who need raw power on jobsites. Other listed saws are stationary and significantly heavier, ranging from 236 to 394 pounds.
What is the maximum rip capacity on these table saws?
The Powermatic PM1000 with 52-Inch Rip offers the largest capacity at 52 inches. Several JET and Powermatic models provide a 30-inch rip capacity. The Bosch GTS15-10 is a portable jobsite saw, so its rip capacity is not specified in the provided data. Check the specific model details if you need to cut wide panels.
Do 4 HP table saws require 230V power?
The Bosch GTS15-10 runs on 15 Amps, which typically implies 120V in a jobsite context. However, many stationary saws in this guide, such as the Powermatic models, require 230V circuits. The JET ProShop II models listed use 120V. You must verify your workshop’s electrical supply before purchasing to ensure compatibility with the specific voltage requirements.
How heavy are the stationary 4 HP table saws?
The stationary saws in this list are very heavy, ranging from 236 to 394 pounds. The Powermatic PM1000 with 52-Inch Rip weighs the most at 394 pounds. The JET ProShop II with steel wings weighs 236 pounds. These weights indicate they are designed for fixed workshop locations rather than frequent transport.
Which table saw is best for wide rip cuts?
The Powermatic PM1000 with 52-Inch Rip is best for wide cuts, offering a 52-inch rip capacity. The JET ProShop II models with 52-inch rip also provide this capacity. If you need 30-inch cuts, several JET and Powermatic models support that size. The Bosch GTS15-10 is portable and not specified for wide rip work.
What blade size do these table saws use?
All listed table saws use a 10-inch blade diameter. This is the standard size for most professional and hobbyist table saws. The Bosch GTS15-10, JET ProShop II, and Powermatic models all feature this blade size. Ensure you purchase 10-inch blades for these machines to maintain proper cutting depth and safety.
See also
Where to buy
at Amazon
Price taken from the listing when this page was written and it can change at any time. We may earn a commission if you buy through this link.
More Table Saws
See the section
Get our picks by email
New reviews and the prices we spotted, once a week.