DEWALT 10-Inch Single-Bevel Compound Miter Alternatives: 6 Similar Picks Compared
Review 6 stationary miter saws similar to the DEWALT DWS713. We compare blade size, motor power, and detent durability to help you choose the best tool.
By GaugeKit Editorial Team 6 min read
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The DEWALT 10-Inch Single-Bevel Compound Miter Saw (DWS713) delivers robust performance for standard framing and trim work. Its 15-amp motor and single-bevel configuration provide reliable cutting power. This tool is ideal for users who prioritize detent durability over sliding versatility. The stainless-steel miter detent plate features 14 positive stops for precise angle control. You get a 2-inch by 6-inch cross-cut capacity at 90 degrees. These specs make it a strong baseline for comparison.
If you need alternatives, this guide compares 6 similar picks. We selected these dewalt 10 inch single bevel compound miter alternatives because their core specifications overlap with the original model. You might want a different blade size, a sliding mechanism, or a dual-bevel setup. Some users prefer a lighter frame for portability. Others need wider cutting capacity for larger lumber. Each option here shares the 10-inch blade or 15-amp motor foundation. You can compare the exact dimensions and bevel types to find the right fit for your specific project requirements.
Comparing 10-Inch Single-Bevel Alternatives
DEWALT 12-Inch Single-Bevel Compound Miter Saw
The DEWALT 12-Inch Single-Bevel Compound Miter Saw (DWS715) upgrades the blade size from 10 inches to 12 inches. This larger diameter allows for cutting wider dimensional lumber and offers greater vertical capacity. You gain the ability to handle demanding joinery tasks that exceed the limits of standard 10-inch models. The trade-off is significant weight and bulk. At 42.8 pounds, this saw is much heavier than the 31-pound DWS713. Its compact footprint in width and height contrasts with the wider base of the original. You should pick this model if you prioritize cutting width and robust build quality over portability. It is designed for users who need more reach without sliding features.
Hoteche 10-Inch Sliding Miter Saw
The Hoteche 10-Inch Sliding Miter Saw introduces sliding capability, which the original DWS713 lacks. This feature allows you to cut wider boards by extending the blade outward. It also includes a laser guide for precision alignment, whereas the original relies on mechanical detents and a machined fence. The Hoteche is slightly heavier at 34.9 pounds compared to the 31-pound DEWALT. It maintains the same 10-inch blade and 15-amp motor power. You should choose this alternative if you need wider cuts and laser precision. The sliding mechanism adds versatility for large panels, though the lower tooth count may not suit every fine finish requirement. It is a practical step up from a fixed-base saw.
MarvTool 10-Inch Sliding Compound Miter Saw
The MarvTool 10-Inch Sliding Compound Miter Saw offers sliding functionality and a lighter frame than the original DEWALT. At 25.6 pounds, it is significantly lighter than the 31-pound DWS713, making it easier to transport. It also features a 5000 RPM motor speed, which may impact cut smoothness compared to the standard DEWALT configuration. Like the Hoteche, it includes a laser guide for alignment. You should pick this model if you prioritize portability and included accessories over maximum cutting speed. It is suitable for lightweight projects that require extension table support. The sliding capability allows for wider cuts than the fixed-base original, but it sacrifices some of the heavy-duty detent durability found in the DEWALT.
VEVOR 10-Inch Dual Bevel Sliding Miter Saw
The VEVOR 10-Inch Dual Bevel Sliding Miter Saw differs fundamentally by offering dual bevel capability. The original DWS713 is single-bevel, meaning it only bevels to one side. This VEVOR model bevels in both directions, which is essential for detailed joinery and symmetrical cuts. It also features sliding rails and a laser guide. At 39.7 pounds, it is heavier than the original. The blade size remains 10 inches with a 15-amp motor. You should choose this alternative if you need dual bevel cuts and wider sliding capacity. It is ideal for woodworkers who prioritize versatility and precision over a lighter frame. The added weight and complexity come at the cost of the simple, robust detent system found in the original.
NOVORIK 10-Inch Sliding Miter Saw
The NOVORIK 10-Inch Sliding Miter Saw provides sliding capability and a laser guide, features absent in the original DWS713. It is designed specifically for woodworking, offering steady performance for precision tasks. The weight is not listed, but the dimensions suggest a compact footprint. It maintains the 10-inch blade and 15-amp motor. You should pick this model if you value laser precision and single-side bevel accuracy for woodworking. It fits users who prioritize sliding width and guided cuts over the maximum speed or width capacity of larger saws. The sliding mechanism allows for wider boards than the fixed original. It is a practical choice for those who need guided accuracy without the complexity of dual bevels.
WEN 10-Inch Single-Bevel Sliding Miter Saw
The WEN 10-Inch Single-Bevel Sliding Miter Saw adds sliding rails and a laser guide to the single-bevel configuration. The original DWS713 is fixed-base, so this WEN model allows for wider cuts. It shares the same 10-inch blade size and 15-amp motor. The WEN is corded, just like the original. You should choose this alternative if you value laser guidance and sliding capacity for wider cuts. It is a practical choice for users who do not need double-bevel functionality. The sliding feature expands its utility beyond the fixed base of the DEWALT. It offers a middle ground between the simple original and more complex dual-bevel models, focusing on single-side precision with added reach.
| # | Product | Best for | Price |
|---|---|---|---|
| 1 | DEWALT 10-Inch Single-Bevel Compound Miter Saw Best overall | Standard framing and trim work | |
| 2 | DEWALT 12-Inch Single-Bevel Compound Miter Saw Best premium | cutting wider dimensional lumber | |
| 3 | Hoteche 10-Inch Sliding Miter Saw Also great | wide board cuts with laser precision | |
| 4 | MarvTool 10-Inch Sliding Compound Miter Saw Best budget | Lightweight projects requiring extension table support | |
| 5 | VEVOR 10-Inch Dual Bevel Sliding Miter Saw Best dual bevel | dual bevel cuts and wider lumber | |
| 6 | NOVORIK 10-Inch Sliding Miter Saw Best woodworking | precision laser-guided single-bevel woodworking | |
| 7 | WEN 10-Inch Single-Bevel Sliding Miter Saw Also great | Users needing laser guidance and sliding capacity |
DEWALT 10-Inch Single-Bevel Compound Miter Saw
Best for: Standard framing and trim work
- Blade Diameter
- 10"
- Configuration
- Compound
- Bevel Type
- Single Bevel
- Amperage
- 15 A
- Positive Stops
- 14
- Dimensions
- 24.8 × 20 × 17.7 inches
This DEWALT DWS713 is a 10-inch single-bevel compound miter saw with a 15-amp motor. It features a stainless-steel detent plate with 14 positive stops for precise angle settings. The tall sliding fence supports 4-1/4-inch base vertically. It cuts 2×6 lumber at 90 degrees and 2×4 at 45 degrees. It suits users who need reliable single-bevel performance without sliding capacity.
- 15-amp motor provides consistent power for dimensional lumber
- Stainless-steel miter detent plate includes 14 positive stops
- Tall sliding fence supports 4-1/4-inch base vertically
- Machined base fence support ensures precise cuts
- Single-bevel design limits cutting angles to the left only
- Non-sliding blade restricts width capacity compared to sliding models
- 31-pound weight is heavier than some compact alternatives
- You need precise single-bevel cuts for framing or trim
- You value durable stainless-steel detent components
- You work with standard 2×4 or 2×6 dimensional lumber
- You require double-bevel cutting for efficiency
- You need to cut wide boards beyond 2×4 width
- You prefer a lighter tool for frequent transport
Verdict: DEWALT 10-Inch Single-Bevel Compound Miter Saw offers robust single-bevel cutting for standard lumber tasks. It fits carpenters who prioritize detent durability over sliding versatility.
DEWALT 12-Inch Single-Bevel Compound Miter Saw
Best for: cutting wider dimensional lumber
- Blade Diameter
- 12"
- Configuration
- Compound
- Bevel Type
- Single Bevel
- Amperage
- 15 A
- Positive Stops
- 14
- Dimensions
- 10.5 × 8.6 × 7.44 inches
This DEWALT model features a 12-inch blade and 15-amp motor, offering greater cutting width than the 10-inch alternatives on this list. It provides 14 positive miter stops and a tall sliding fence that supports 5-1/2-inch base vertically. The tool weighs 42.8 pounds and cuts 2×8 lumber at 90 degrees. It suits users who need extended reach for wider boards.
- 12-inch blade diameter for wider cuts
- 15-amp motor provides substantial power
- 14 positive miter stops for precision
- Tall sliding fence supports 5-1/2-inch base
- Heavier build at 42.8 pounds
- Larger footprint due to 12-inch blade size
- Single bevel limits right-side cutting angles
- You regularly cut wide boards like 2x8s
- You need extended vertical capacity for tall stock
- You prefer a larger blade for cleaner cuts
- You need double-bevel capability for efficiency
- You require a compact tool for tight spaces
- You prefer a lighter saw for frequent moves
Verdict: DEWALT 12-Inch Single-Bevel Compound Miter Saw fits carpenters who prioritize cutting width and vertical capacity over portability. Its larger blade and robust build support demanding joinery tasks that exceed the limits of standard 10-inch models.
Hoteche 10-Inch Sliding Miter Saw
Best for: wide board cuts with laser precision
- Blade Diameter
- 10-Inch
- Configuration
- Sliding Compound
- Bevel Type
- Single Bevel
- Amperage
- 15-Amp
- No-Load Speed
- 4500 RPM
- Guide System
- Laser Guide
The Hoteche P805218A is a 15-amp sliding compound miter saw with a single-bevel design. It features a 10-inch blade with 40 teeth and runs at 4500 RPM. The saw includes a laser guide for alignment. It measures 26 inches long and weighs 34.9 pounds. This tool suits users needing extended cutting width for framing or decking projects.
- 15-amp motor delivers 4500 RPM no-load speed
- Sliding mechanism extends cutting capacity to 340mm
- Single-bevel cuts up to 45 degrees left
- Includes laser guide for precision alignment
- Comes with dust bag and extension bar
- 40-tooth blade is lower count than typical 60-tooth alternatives
- 34.9-pound weight is heavier than many 10-inch single-bevel models
- Single-bevel design limits cutting angles compared to double-bevel options
- You need extended cutting width for wide boards
- You prefer laser guides over optical bevel gauges
- You work primarily with single-bevel cuts
- You require double-bevel capability for right-side cuts
- You prioritize a lighter tool for frequent transport
- You need a higher tooth count for finer finishes
Verdict: Hoteche 10-Inch Sliding Single Bevel Miter Saw fits users who need wider cuts and a laser guide, though its weight and lower tooth count may not suit everyone.
MarvTool 10-Inch Sliding Compound Miter Saw
Best for: Lightweight projects requiring extension table support
- Blade Diameter
- 10-inch
- Configuration
- Sliding Compound
- Bevel Type
- Single Bevel
- Amperage
- 15 Amp
- No-Load Speed
- 5000 RPM
- Application
- Metal
This Marvtool 10-inch sliding compound miter saw features a 15-amp motor running at 5000 RPM. It offers single bevel cuts up to 45° and left miter angles from 0° to 45°. The unit weighs 25.6 lbs and includes extension tables. It suits you if you need a lightweight, portable saw for wood and soft metal. The 36-tooth blade handles basic cutting tasks efficiently.
- 15-amp motor delivers 5000 RPM no-load speed
- Lightweight 25.6 lb design for easy portability
- Includes two extension tables for added support
- Transparent blade guard for clear visibility
- Single bevel cuts adjust from 0° to 45°
- 36-tooth blade cuts slower than 60-tooth options
- Single bevel limits cuts to one side only
- 5000 RPM speed is lower than 15,000 RPM models
- You need a lightweight saw under 30 lbs
- You work with wood and soft metals
- You want included extension tables for stability
- You require double bevel cutting capability
- You need high-speed cutting for hard materials
- You prefer a saw with a 60-tooth blade
Verdict: Marvtool 10-inch Sliding Miter Saw fits you if you prioritize portability and included accessories over cutting speed and double-bevel versatility.
VEVOR 10-Inch Dual Bevel Sliding Miter Saw
Best for: dual bevel cuts and wider lumber
- Blade Diameter
- 10"
- Configuration
- Sliding Compound
- Bevel Type
- Double Bevel
- Amperage
- 15 Amp
- No-Load Speed
- 5000 RPM
- Guide System
- LED Precision Laser Alignment
This VEVOR saw features a 10-inch blade and 15-amp motor. It offers dual bevel capability, allowing bi-directional cuts for detailed projects. The sliding compound design handles wider lumber with ease. An LED laser guide ensures precise alignment. Weighing 39.7 pounds, it provides stable operation for woodworking tasks requiring accurate angled joints.
- Dual bevel cuts for complex assemblies
- LED precision laser alignment system
- Sliding compound design for wider crosscuts
- 15-amp motor with 5000 RPM speed
- Heavier build at 39.7 pounds
- 10-inch blade limits maximum cut width compared to 12-inch alternatives
- You need bi-directional bevel cuts for frame work
- You prefer sliding capacity for wider lumber
- You want laser alignment for precision
- You require a 12-inch blade for larger stock
- You need a lighter tool for frequent mobility
- You only perform single bevel cuts
Verdict: VEVOR 10-Inch Dual Bevel Sliding Miter Saw suits woodworkers needing dual bevel capability for detailed joinery. It fits those prioritizing sliding width and laser precision over a lighter frame or larger blade size.
NOVORIK 10-Inch Sliding Miter Saw
Best for: precision laser-guided single-bevel woodworking
- Blade Diameter
- 10"
- Configuration
- Compound Sliding
- Bevel Type
- Single Bevel
- Power Source
- Corded
- Amperage
- 15-Amp
- No-Load Speed
- 4,000 rpm
This Novorik miter saw features a 15-amp motor and a 10-inch blade. It delivers 4,000 rpm for efficient cutting. The single-bevel design offers a 0° to 45° bevel range. A laser guide helps you track cut lines precisely. It includes positive stops for common angles. This tool suits woodworking tasks requiring accurate single-side bevel cuts.
- 15-amp motor provides 4,000 rpm no-load speed
- Laser guide tracks real-time cut position
- Positive stops at 0°, 15°, 22.5°, 30°, and 45°
- Single-bevel range from 0° to 45°
- 4,000 rpm is slower than the 5,000 rpm Marvtool
- Single-bevel design limits cutting versatility compared to double-bevel options
- 10-inch blade size restricts width capacity versus 12-inch models
- You need precise laser-guided cuts for woodworking projects
- You require positive angle stops for repetitive cuts
- You prefer a single-bevel saw for standard trim work
- You need double-bevel capability for complex angles
- You require higher speeds than 4,000 rpm
- You need to cut wider boards than a 10-inch blade allows
Verdict: Novorik 10-Inch Single Bevel Sliding Miter Saw delivers steady performance for woodworkers who value laser precision. It fits users who prioritize single-side bevel accuracy over maximum speed or width capacity.
WEN 10-Inch Single-Bevel Sliding Miter Saw
Best for: Users needing laser guidance and sliding capacity
- Blade Diameter
- 10-Inch
- Configuration
- Sliding Compound
- Bevel Type
- Single-Bevel
- Power Source
- Corded
- Amperage
- 15-Amp
- Guide System
- Laser
The WEN MM1014T is a 15-amp, 10-inch single-bevel sliding compound miter saw. It features a laser guide for cutline accuracy and five positive miter stops. The powerful motor handles crosscuts up to 13.4 inches wide. You get a 40-tooth carbide-tipped blade and support fences included. This corded tool suits users needing a reliable sliding saw with visual aids for precision work.
- 15-amp motor provides strong cutting power
- Laser guide illuminates the cutline for accuracy
- Five positive miter stops simplify angle setting
- Includes 40-tooth carbide blade and support fences
- Single-bevel design limits bevel cuts to one side
- Only five positive miter stops compared to more on other models
- 40-tooth blade cuts slower than higher-tooth options
- You need a sliding miter saw for wider boards
- You prefer visual guides for cutline accuracy
- You want a corded tool with included accessories
- You require double-bevel cutting capability
- You need more than five positive miter stops
- You prefer a higher tooth count blade for speed
Verdict: WEN 10-Inch Single-Bevel Sliding Miter Saw fits users who value laser guidance and sliding capacity for wider cuts. It is a practical choice for those who do not need double-bevel functionality.
Specifications side by side
| Spec | DEWALT 10-Inch Single-Bevel Compound Miter Saw | DEWALT 12-Inch Single-Bevel Compound Miter Saw | Hoteche 10-Inch Sliding Miter Saw | MarvTool 10-Inch Sliding Compound Miter Saw | VEVOR 10-Inch Dual Bevel Sliding Miter Saw | NOVORIK 10-Inch Sliding Miter Saw | WEN 10-Inch Single-Bevel Sliding Miter Saw |
|---|---|---|---|---|---|---|---|
| Blade Diameter | 10" | 12" | 10-Inch | 10-inch | 10" | 10" | 10-Inch |
| Configuration | Compound | Compound | Sliding Compound | Sliding Compound | Sliding Compound | Compound Sliding | Sliding Compound |
| Bevel Type | Single Bevel | Single Bevel | Single Bevel | Single Bevel | Double Bevel | Single Bevel | Single-Bevel |
| Power Source | – | – | – | – | – | Corded | Corded |
| Amperage | 15 A | 15 A | 15-Amp | 15 Amp | 15 Amp | 15-Amp | 15-Amp |
| No-Load Speed | – | – | 4500 RPM | 5000 RPM | 5000 RPM | 4,000 rpm | – |
| Guide System | – | – | Laser Guide | – | LED Precision Laser Alignment | Laser Guide | Laser |
| Positive Stops | 14 | 14 | – | – | – | – | 5 |
| Speed | – | – | – | 5000 RPM | – | – | – |
| Intended Use | – | – | – | – | – | Woodworking | – |
| Application | – | – | Metal | Metal | – | – | – |
| Dimensions | 24.8 × 20 × 17.7 inches | 10.5 × 8.6 × 7.44 inches | 26 × 16 × 13 inches | 25.3 × 18.5 × 20.4 inches | 30.3 × 20.9 × 27.6 inches | 28.3 × 15 × 18 inches | 30.5 × 22.6 × 14.8 inches |
| Weight | 31 pounds | 42.8 pounds | 34.9 pounds | 25.6 pounds | 39.7 pounds | – | – |
| Size | One Size | One Size | 10in Sliding | 10" | 10 in | 10" | Corded, 10 in. |
| Color | Multi | Multi | Yellow | Black Yellow | Black | Silver & Black | Black |
| Model | DWS713 | DWS715 | P805218A | JS-1013C4 | J1G-ZP33-K255D | 1009xqj00101 | MM1014T |
Frequently asked questions
Is the DEWALT DWS713 sliding or stationary?
The DEWALT DWS713 is a stationary single-bevel compound miter saw. It lacks a sliding mechanism, meaning it cannot extend its cutting width beyond the blade diameter. This design prioritizes detent durability and stability over the versatility of sliding cuts. You get a robust build suited for standard framing tasks where maximum width is not required.
Which alternative offers dual bevel capability?
The VEVOR 10-Inch Dual Bevel Sliding Miter Saw (J1G-ZP33-K255D) is the only option in this list that features dual bevel cutting. This allows you to bevel the workpiece in both directions without flipping it. It combines this feature with sliding capacity and a laser guide, making it ideal for detailed joinery where symmetry is key.
Can I cut wider boards with the DEWALT 12-inch model?
Yes, the DEWALT DWS715 features a 12-inch blade, which provides greater cutting width and vertical capacity than the 10-inch models. This larger diameter allows you to handle wider dimensional lumber and more demanding joinery tasks. However, the trade-off is increased weight and size, making it less portable than the 10-inch alternatives.
Do these saws include laser guides?
Several alternatives include laser guides for improved precision. The Hoteche P805218A, VEVOR J1G-ZP33-K255D, Novorik 1009xqj00101, and WEN MM1014T all feature laser guide systems. These guides help you align the blade accurately with your cut line. The DEWALT DWS713 and MarvTool JS-1013C4 do not list laser guidance in their specifications.
Which saw is the lightest for portability?
The MarvTool JS-1013C4 is the lightest option at 25.6 pounds. It is designed for users who prioritize portability and included accessories over cutting speed or double-bevel versatility. The DEWALT DWS713 weighs 31 pounds, while the VEVOR and DEWALT 12-inch models are significantly heavier, weighing 39.7 and 42.8 pounds respectively.
Is the Hoteche saw suitable for metal cutting?
The Hoteche P805218A lists metal as one of its intended applications. It features a 10-inch blade and a laser guide for precision. However, its lower tooth count and weight of 34.9 pounds may not suit every user. You should verify blade compatibility for specific metal types before use, as the primary design focus remains on general cutting tasks.
See also
Where to buy
at Amazon
Price taken from the listing when this page was written and it can change at any time. We may earn a commission if you buy through this link.
More Miter Saws
See the section
Get our picks by email
New reviews and the prices we spotted, once a week.