DEWALT DCH273P2 20V Max Brushless Review: Specs, Pros and Cons
This DEWALT DCH273P2 20V Max brushless review analyzes specs like 2.1 Joules of impact energy and 11.7-pound weight to help you decide if it fits your masonry work.
By GaugeKit Editorial Team 7 min read
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This dewalt dch273p2 20v max brushless review covers the DEWALT DCH273P2 cordless rotary hammer. It features a 20V Max brushless motor and delivers 2.1 Joules of impact energy. This combination allows for fast drilling in concrete. The tool includes two 5 Ah batteries for extended runtime. Its lightweight design aids in overhead tasks. You get a durable German-engineered mechanism for reliable performance. The rotating dial lets you switch between drill, hammer drill, and chip modes. This spec-focused look helps you decide if it fits your job site needs.
- 2.1 Joules of impact energy for efficient concrete drilling
- Brushless motor paired with a German-engineered mechanism
- SHOCKS Active Vibration Control reduces handle vibration
- Rotating dial for Drill, Hammer Drill, or Chip modes
- Includes two 5.0Ah batteries for extended runtime
Good fit for
You should consider this tool if you need a cordless rotary hammer for rod hanging, seismic attachments, or strut mounting. The 2.1 Joules of impact energy handles concrete drilling effectively. The vibration control system is beneficial for users who perform repetitive hammering tasks. The included 5.0Ah batteries support longer work sessions without frequent swaps. Its lightweight build makes it suitable for overhead installations where fatigue is a concern.
Who can skip it
You might want to look elsewhere if you require a heavy-duty rotary hammer for large-diameter core drilling. The 2.1 Joules of impact energy is modest for aggressive masonry work. If you need a tool with an OSHA Table 1 compliant dust extraction system built-in, note that it requires the separate DWH303DH On Board Extractor. The SDS chuck limits bit compatibility compared to SDS-Max systems. Users seeking higher impact energy for heavy demolition will find this model underpowered.
Verdict
The DEWALT DCH273P2 offers solid performance for light to medium concrete drilling tasks. Its brushless motor and vibration control make it a practical choice for overhead installations.
Key specs explained for DEWALT DCH273P2
Impact Energy: 2.1 Joules
This rating measures the force delivered into the material per blow. Higher joules mean faster penetration into hard substrates like concrete or masonry. You benefit from reduced drilling time when installing anchors or running conduit. When comparing tools, check this number against your typical job. Lighter duty tasks may require less energy, while heavy structural work needs higher output for efficiency.
Motor Type: Brushless
A brushless motor uses electronic commutation instead of physical brushes. This design reduces friction and wear, leading to longer motor life and better efficiency. You get more runtime per charge and consistent power output as the battery drains. When shopping, brushless models are the standard for professional use due to their durability and lower maintenance needs compared to brushed alternatives.
Chuck Type: SDS
SDS refers to a specific shank design for drill bits and hammer bits. It allows for quick bit changes without a key and provides a secure lock. This system transfers torque efficiently and reduces bit slippage during heavy hammering. You benefit from faster setup and better performance in masonry. When buying bits, ensure they match the SDS standard for compatibility and safety.
Operating Modes: Drill, Hammer Drill, or Chip
These modes allow you to switch the tool function based on the task. Drill mode rotates only for wood or metal. Hammer drill mode adds impact for masonry. Chip mode uses only hammering for chiseling or demolition. You gain versatility by using one tool for multiple applications. When selecting a tool, ensure it includes all modes you need for your specific trade or projects.
Design and build details
The DEWALT DCH273P2 features a lightweight design that aids in overhead work. According to the listing, the tool weighs 11.7 pounds. This mass is manageable for tasks like rod hanging or seismic attachment installation. The unit measures 19.3 inches in length and 4.72 inches in height. Its width is 11.9 inches. These dimensions fit standard workspaces without excessive bulk. You can handle the tool for extended periods during cable tray or strut mounting.
The control layout centers on a rotating dial. This dial lets you select specific application modes. You can choose between Drill, Hammer Drill, or Chip modes. This versatility allows you to adapt the tool quickly to different masonry or drilling needs. The brushless motor provides efficient performance and runtime. This motor type is paired with a durable German-engineered mechanism. This combination supports consistent operation under load.
Vibration management is handled by the SHOCKS ACTIVE VIBRATION CONTROL System. This feature reduces vibration felt at the handles compared to rotary hammers without it. Reduced vibration helps maintain control during precision work. The tool is OSHA Table 1 Compliant when paired with the DWH303DH On Board Extractor. This compliance supports safer dust management in professional environments. The finish and build quality support regular job site use.
Setup and everyday use
You begin setup by inserting the included 5 Ah batteries into the DEWALT DCH273P2. The 20V Max power system provides the necessary voltage for the brushless motor. This motor type is designed for efficient performance and longer runtime compared to brushed alternatives. You do not need to adjust brushes, which simplifies maintenance during daily use.
The tool features an SDS chuck type. This allows for quick bit changes without a key. You select the operating mode using the rotating dial. You can switch between Drill, Hammer Drill, or Chip modes. This dial lets you set the tool to a specific application mode instantly. For example, you use the Chip mode for chiseling or the Hammer Drill mode for concrete penetration.
The SHOCKS ACTIVE VIBRATION CONTROL System reduces vibration felt by the user at the handles. This feature is present compared to rotary hammers without it. You benefit from reduced fatigue during extended periods of use. The lightweight design aids in overhead work, such as rod hanging or seismic attachment installation. The tool weighs 11.7 pounds. This mass is manageable for tasks like cable tray mounting or clamp mounting.
For dust control, the tool is OSHA Table 1 Compliant when paired with the DWH303DH On Board Extractor. You connect this extractor to maintain a clean work environment. The durable German-engineered mechanism supports these daily tasks. You rely on the 2.1 Joules of impact energy for fast drilling in concrete. This specification ensures efficient performance in masonry applications.
Before You Buy This Tool
You should verify your dust extraction needs before purchasing. The listing notes OSHA Table 1 compliance only when paired with the DWH303DH On Board Extractor. If you work in regulated environments, you must acquire that specific accessory to meet safety standards. The 20V Max system requires compatible DEWALT batteries. While the kit includes two 5 Ah units, you may need additional packs for all-day jobs without recharging. Check your existing battery inventory to avoid buying redundant power sources. Maintenance is minimal with the brushless motor, but you should keep the SDS chuck clean for optimal grip. This tool sits alongside other options in our 1 review by offering a balance of power and weight. Its 2.1 Joules of impact energy suits medium-duty concrete work, whereas heavier tasks might require higher joule ratings. Ensure your projects align with these specific capabilities.
Check before you buy
- Confirm you have the DWH303DH extractor for OSHA compliance.
- Check if your existing DEWALT 20V batteries are compatible.
- Verify the 2.1 Joules impact energy suits your concrete tasks.
- Ensure you have extra 5 Ah batteries for long jobs.
DEWALT 20V Max Brushless Rotary Hammer
Best for: Overhead masonry tasks with vibration control
- Impact Energy
- 2.1 Joules
- Chuck Type
- SDS
- Operating Modes
- Drill, Hammer Drill, or Chip
- Voltage
- 20V Max
- Motor Type
- Brushless
- Battery Capacity
- 5.0Ah
This DEWALT rotary hammer delivers 2.1 Joules of impact energy for fast concrete drilling. It features a brushless motor and includes two 5 Ah batteries. The SHOCKS ACTIVE VIBRATION CONTROL system reduces handle vibration. You get three operating modes: Drill, Hammer Drill, and Chip. At 11.7 pounds, it is lightweight for overhead tasks. It suits professionals needing efficient, cordless power for masonry work.
- 2.1 Joules of impact energy for fast drilling
- Brushless motor for efficient performance and runtime
- SHOCKS ACTIVE VIBRATION CONTROL reduces user vibration
- Includes two 5 Ah batteries
- Three operating modes: Drill, Hammer Drill, Chip
- Heavier build at 11.7 pounds compared to lighter models
- Lower impact energy of 2.1 Joules limits deep drilling speed
- Larger dimensions at 19.3 inches length reduce maneuverability
- You need cordless power for concrete drilling
- You want reduced vibration for comfort
- You require a brushless motor for runtime
- You prefer a lighter tool under 10 pounds
- You need higher impact energy for heavy duty work
- You require a compact design for tight spaces
Verdict: DEWALT DCH273P2 20V Brushless Rotary Hammer suits professionals who need reliable cordless power with vibration control. It is ideal for rod hanging and strut mounting tasks where overhead comfort matters.
Specifications side by side
| Spec | DEWALT 20V Max Brushless Rotary Hammer |
|---|---|
| Impact Energy | 2.1 Joules |
| Chuck Type | SDS |
| Operating Modes | Drill, Hammer Drill, or Chip |
| Voltage | 20V Max |
| Motor Type | Brushless |
| Battery Capacity | 5.0Ah |
| Dimensions | 19.3 × 11.9 × 4.72 inches |
| Weight | 11.7 pounds |
| Size | One Size |
| Color | Multi |
| Model | DCH273P2 |
Frequently asked questions
Is the DEWALT DCH273P2 suitable for overhead masonry work?
Yes, it is designed for overhead tasks. The tool weighs 11.7 pounds, which helps manage fatigue during extended use. Its compact length of 19.3 inches allows for better maneuverability in tight spaces. This makes it a practical choice for rod hanging or strut mounting where overhead comfort matters.
What battery capacity does the DEWALT DCH273P2 include?
The kit includes two 5.0 Ah batteries. This capacity supports the 20V Max brushless motor for efficient performance. The higher amp-hour rating provides longer runtime compared to lower capacity options. You can swap batteries to maintain workflow without waiting for a recharge between jobs.
How long is the DEWALT DCH273P2 rotary hammer?
The unit measures 19.3 inches in length. This dimension affects reach and balance during operation. Combined with a width of 11.9 inches, the size fits standard workspaces. The height is 4.72 inches, keeping the profile low for overhead or confined area drilling tasks.
Does the DEWALT DCH273P2 have a brushless motor?
Yes, it features a 20V Max brushless motor. This type of motor offers efficient performance and longer runtime. It reduces maintenance needs since there are no brushes to wear out. The brushless design also helps deliver consistent power for drilling in concrete and masonry materials.
What is the weight of the DEWALT DCH273P2 tool?
The tool weighs 11.7 pounds. This mass is manageable for professionals who need reliable cordless power. The weight distribution aids in stability during heavy drilling. It is not excessively heavy, allowing for better control when installing anchors or running conduit in hard substrates.
What voltage system powers the DEWALT DCH273P2?
It operates on a 20V Max power system. This voltage provides the necessary power for the brushless motor. The 20V platform is widely compatible with other tools in the series. You benefit from consistent performance and the ability to share batteries across multiple devices in your workflow.
See also
Where to buy
at Amazon
Price taken from the listing when this page was written and it can change at any time. We may earn a commission if you buy through this link.
More Rotary Hammers
See the sectionGet our picks by email
New reviews and the prices we spotted, once a week.




