Skip to content
Most covered
Newsletter

Rotary Hammers

DEWALT vs Makita: Rotary Hammers Compared by Specs

We compare DEWALT and Makita rotary hammers using published specs. You get clear data on voltage, impact energy, and weight to pick the right tool for your job.

By GaugeKit Editorial Team 6 min read

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This DEWALT vs makita rotary hammer comparison looks at two distinct tools. You might expect a direct model match, but the data shows different categories. Both are cordless and brushless, offering efficient power delivery. The main difference is that one is a dedicated rotary hammer, while the other is a general-purpose hammer driver-drill in a combo kit. You need to check the specs to see which fits your drilling needs.

Voltage

20V MAX

18V

Chuck Type

SDS

1/2 inch

Impact Energy

2.1 Joules

not listed

Max Torque

not listed

530 in-lbs

Kit Size

Bare Tool

2-Tool

Weight

6.4 pounds

13 pounds

Choose the first if

  • You need to drill into concrete using SDS bits for construction tasks.
  • You want a lighter, single tool focused on hammer drilling.
  • You already own compatible 20V MAX batteries and prefer a bare tool.

Choose the second if

  • You need a versatile hammer drill for general wood and metal work.
  • You want a complete kit with two tools and batteries included.
  • You prioritize high torque for driving large fasteners over concrete drilling.

Verdict

Choose the DEWALT if your primary task is drilling into masonry with SDS bits. The Makita kit is better if you need a general hammer drill and an impact driver for broader fastening and drilling tasks. Your choice depends on whether you need specialized rotary hammering or general cordless versatility.

DEWALT vs Makita Rotary Hammer Specs

Power system voltage

Edge: DEWALT 20V MAX SDS Cordless Rotary Hammer

You get different voltage ratings with these two tools. The DEWALT DCH273B operates on a 20V MAX system. This higher voltage platform typically supports more robust power delivery for heavy-duty tasks like drilling into concrete. The Makita XT269T runs on an 18V LXT platform. While 18V is a standard for many cordless tools, it sits slightly lower than the DEWALT rating. This difference matters if you are already invested in one battery ecosystem. Sticking with one brand simplifies your tool collection. The DEWALT has a slight edge here for raw voltage potential.

Chuck and drilling type

Edge: DEWALT 20V MAX SDS Cordless Rotary Hammer

The chuck type defines what bits you can use and what materials you can drill. The DEWALT features an SDS chuck. This system is designed specifically for rotary hammers, allowing for quick bit changes and efficient power transfer into masonry. The Makita kit includes a standard 1/2 inch hammer driver-drill. This is a versatile chuck for wood and metal, and some masonry, but it is not an SDS system. If you need to drill large holes in concrete regularly, the SDS chuck is the professional choice. The DEWALT is built for this specific job.

Impact energy output

Edge: DEWALT 20V MAX SDS Cordless Rotary Hammer

Impact energy determines how effectively the tool breaks up hard material like concrete or brick. The DEWALT specifies 2.1 Joules of impact energy. This is a significant metric for a rotary hammer, indicating strong hammering action. The Makita data does not list impact energy in Joules for its hammer driver-drill. It lists max torque, which is different. Torque measures twisting force, not the hammering blow. For pure masonry work, the DEWALT’s specified impact energy gives it a clear advantage. You know exactly what you are getting with the DEWALT spec.

Motor technology

Edge: Tie

Both tools use brushless motors. The DEWALT uses a brushless motor with a German-engineered mechanism for efficiency. The Makita uses its BL Brushless motor, which is electronically controlled to optimize battery use. Brushless motors last longer and run cooler than brushed ones. This is a tie because both brands have committed to this technology. You get better runtime and durability from both. Neither tool uses older brushed technology. This is a standard feature in modern cordless power tools from both manufacturers.

Included tools and kit

Edge: Makita 18V Brushless 2-Tool Kit

You need to check what comes in the box. The DEWALT is a bare tool only. You must buy the battery and charger separately. This keeps the initial purchase price lower if you have batteries. The Makita is a 2-Tool Kit. It includes a hammer driver-drill and an impact driver. It also includes a 5.0Ah battery. This is a complete starting package. If you do not have Makita batteries, this kit is more complete. The Makita has a significant advantage for new users who need everything to start working immediately.

Which rotary hammer suits your needs

Concrete drilling specialists needing high impact

Our pick: DEWALT 20V MAX SDS Cordless Rotary Hammer

You need dedicated rotary hammer performance. The DEWALT DCH273B delivers 2.1 Joules of impact energy for fast concrete drilling. Its SDS chuck handles masonry bits securely. The SHOCKS ACTIVE VIBRATION CONTROL reduces handle vibration. This makes it ideal for rod hanging and seismic attachments where precision matters.

General contractors wanting a versatile tool kit

Our pick: Makita 18V Brushless 2-Tool Kit

You want two tools in one package. The Makita XT269T includes a hammer driver-drill and an impact driver. Both use efficient BL Brushless motors for longer run time. You get 530 in-lbs of torque for driving and drilling. This kit covers general construction tasks efficiently without buying separate items.

Users prioritizing lightweight and reduced fatigue

Our pick: DEWALT 20V MAX SDS Cordless Rotary Hammer

You work overhead or in tight spaces. The DEWALT DCH273B weighs 6.4 pounds. Its lightweight design reduces user fatigue during extended use. The rotating dial lets you switch between drill, hammer drill, and chip modes quickly. This versatility helps you adapt to different mounting and drilling requirements on the job site.

1
DEWALT 20V MAX SDS Cordless Rotary Hammer

DEWALT 20V MAX SDS Cordless Rotary Hammer

Best for: Users with existing 20V MAX batteries

Impact Energy
2.1 Joules
Chuck Type
SDS
Operating Modes
Drill, Hammer Drill, or Chip
Voltage
20V MAX
Motor Type
Brushless
Power Source
Cordless

This DEWALT DCH273B is a cordless 20V MAX rotary hammer with a brushless motor. It delivers 2.1 Joules of impact energy for fast concrete drilling. The tool features an SDS chuck and three application modes: drill, hammer drill, or chip. It weighs 6.4 pounds and measures 13 inches long. SHOCKS ACTIVE VIBRATION CONTROL reduces handle vibration. It is a bare tool, so you need a compatible battery.

Pros
  • Brushless motor provides efficient performance and runtime.
  • 2.1 Joules of impact energy for concrete drilling.
  • SHOCKS ACTIVE VIBRATION CONTROL reduces handle vibration.
  • Rotating dial sets tool to specific application modes.
Cons
  • Heavier at 6.4 pounds compared to lighter alternatives.
  • Lower impact energy at 2.1 Joules than competitors.
  • Sold as a bare tool without a battery included.
Good fit if
  • You need a cordless rotary hammer with vibration control.
  • You already own DEWALT 20V MAX batteries.
  • You require three distinct application modes for drilling.
Skip if
  • You prefer a lighter tool under 6 pounds.
  • You need higher impact energy for heavy demolition.
  • You want a complete kit with a battery included.

Verdict: DEWALT 20V MAX Brushless Rotary Hammer suits users who already have 20V MAX batteries and value vibration control. It is best for those who need a bare tool with specific mode settings.

2
Makita 18V Brushless 2-Tool Kit

Makita 18V Brushless 2-Tool Kit

Best for: general drilling and driving tasks

Voltage
18V
Motor Type
BL Brushless
Battery Capacity
5.0Ah
Kit Size
2-Tool
Power Source
Cordless
Configuration
Kit

This Makita XT269T is a 2-tool cordless kit featuring an 18V brushless motor system. It includes a 1/2-inch hammer driver-drill with 530 in-lbs of torque and an impact driver with 1,500 in-lbs of torque. The kit weighs 13 pounds total. It suits users who need versatile drilling and driving power with efficient energy use from the BL motor technology.

Pros
  • BL Brushless motor optimizes battery energy for up to 50% longer run time
  • Hammer driver-drill delivers 530 in-lbs of max torque
  • Impact driver provides 1,500 in-lbs of max torque
  • Tool weighs only 4.2 pounds with battery
Cons
  • Max torque of 530 in-lbs is lower than typical rotary hammer standards
  • Total kit weight is 13 pounds
Good fit if
  • You need a versatile drill and impact driver combo
  • You prefer brushless motor efficiency for longer run times
  • You work with 18V battery systems
Skip if
  • You require a dedicated SDS rotary hammer for heavy masonry
  • You need higher torque than 530 in-lbs for drilling
  • You prefer a single tool over a 2-tool kit

Verdict: Makita 18V Brushless Combo Kit offers solid torque for general drilling and driving but lacks the specialized power of a dedicated rotary hammer. It fits users who value brushless efficiency and versatility in a 2-tool kit.

Specifications side by side

SpecDEWALT 20V MAX SDS Cordless Rotary HammerMakita 18V Brushless 2-Tool Kit
Impact Energy2.1 Joules–
Chuck TypeSDS–
Operating ModesDrill, Hammer Drill, or Chip–
Voltage20V MAX18V
Motor TypeBrushlessBL Brushless
Battery Capacity–5.0Ah
Kit Size–2-Tool
Included ToolsHammer Drill–
Power SourceCordlessCordless
ConfigurationBare ToolKit
Set TypeTool Only–
Dimensions13 × 4.2 × 8.6 inches16.7 × 11.2 × 6.5 inches
Weight6.4 pounds13 pounds
SizeOne SizeKit Only
ColorMultiTeal
ModelDCH273BXT269T

Frequently asked questions

Is the DEWALT DCH273B sold with a battery?

No, the DEWALT DCH273B is a bare tool. You must purchase the 20V MAX battery and charger separately. This configuration is ideal if you already own DEWALT 20V MAX batteries. It allows you to use your existing power source without buying a new kit. The tool itself weighs 6.4 pounds.

What voltage system does the Makita XT269T use?

The Makita XT269T operates on an 18V system. It is part of a 2-tool kit that includes a drill and an impact driver. The kit comes with a 5.0Ah battery. This setup is designed for general drilling and driving tasks rather than heavy-duty rotary hammering. It offers brushless efficiency for these common jobs.

Which tool is better for drilling into concrete?

The DEWALT DCH273B is the better choice for concrete. It is a dedicated rotary hammer with SDS compatibility for secure masonry bit attachment. The Makita XT269T is a standard drill and driver kit. It lacks the specialized impact mechanism needed for efficient concrete work. Choose the DEWALT for masonry tasks.

How much does the DEWALT rotary hammer weigh?

The DEWALT DCH273B weighs 6.4 pounds. This weight refers to the bare tool without a battery. Its dimensions are 13 inches in length, 4.2 inches in width, and 8.6 inches in height. This compact size helps with maneuverability in tight spaces during drilling operations.

Does the Makita kit include a rotary hammer?

No, the Makita XT269T is not a rotary hammer. It is a 2-tool combo kit featuring a brushless drill and impact driver. It is best for general drilling and driving tasks. It does not have the high-impact energy required for masonry. You need a dedicated tool for that purpose.

Can I use Makita batteries with the DEWALT tool?

No, you cannot use Makita batteries with the DEWALT DCH273B. The DEWALT tool requires a 20V MAX battery. The Makita kit uses an 18V system. These brands use different battery platforms. You must stick to the specific voltage system of each tool for compatibility and safety.

See also

Where to buy

at Amazon

View deal

Price taken from the listing when this page was written and it can change at any time. We may earn a commission if you buy through this link.