Skip to content
Most covered
Newsletter

Wood Routers

Makita RP1800 3-1/4 HP* Plunge or Makita RF1101 2-1/4 HP* Router? Which Makita Model to Buy

Compare the Makita RP1800 3 1/4 HP plunge vs RF1101 2 1/4 HP router. We analyze published specs to help you choose the right Makita model for your shop.

By GaugeKit Editorial Team 6 min read

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

You are deciding between the makita rp1800 3 1 4 hp plunge vs rf1101 2 1 4 hp router. Both tools come from Makita and share a 4 HP motor rating. The main difference lies in their design and power delivery. The RP1800 is a heavy plunge router with fixed speed. The RF1101 is a lighter fixed-base router with variable speed control. Your choice depends on whether you need plunge depth adjustment or speed flexibility.

Base Type

Plunge

Fixed

Horsepower

3-1/4 HP

2-1/4 HP

Speed Control

Fixed 22,000 RPM

Variable speed

Weight

13.2 pounds

7.1 pounds

Amperage

15 A

not listed

Choose the first if

  • You need plunge depth adjustment for routing into material.
  • You require maximum horsepower for heavy stock removal.
  • You prefer a fixed speed of 22,000 RPM for consistent results.

Choose the second if

  • You need variable speed to match different bit types.
  • You want a lighter tool for easier handling.
  • You value soft start and constant speed under load.

Verdict

Choose the RP1800 if your work requires plunge routing and maximum power. Select the RF1101 if you prioritize portability and the ability to adjust speed for various tasks. Both models offer robust Makita performance.

Router Specs Compared Side

Horsepower and power

Edge: Makita RP1800 3-1/4 HP Plunge Router

The Makita RP1800 offers 3-1/4 HP of power, while the Makita RF1101 provides 2-1/4 HP. Both tools share a 4 HP motor rating in their attributes, but the key specs highlight the difference in output. The RP1800 delivers more torque for heavy-duty tasks. The RF1101 is sufficient for lighter routing work. You get more raw power with the plunge model. This matters when cutting dense hardwoods or large bits.

Speed control and range

Edge: Makita RF1101 2-1/4 HP Router

The Makita RP1800 runs at a fixed 22,000 RPM. The Makita RF1101 features variable speed control, allowing you to match the speed to your application. It also uses electronic speed control to maintain constant speed under load. This flexibility is useful for different bit types and materials. The RF1101 gives you more control over the cutting process. The RP1800 is simpler but less adaptable to varying needs.

Plunge mechanism

Edge: Makita RP1800 3-1/4 HP Plunge Router

The Makita RP1800 is a plunge router with a depth capacity of 0 to 2-3/4 inches. It uses linear ball bearings for smooth plunge action. The Makita RF1101 is a fixed base router without plunge capability. If you need to start cuts in the middle of a workpiece, the RP1800 is the only choice. The plunge feature adds precision and ease for many joinery tasks. The RF1101 requires edge starting or pre-drilled holes.

Weight and handling

Edge: Makita RF1101 2-1/4 HP Router

The Makita RP1800 weighs 13.2 pounds and measures 12.8 inches wide. The Makita RF1101 weighs 7.1 pounds and is much more compact. The RF1101 has a small 3-1/4 inch diameter motor housing for easy handling. You will feel less fatigue using the RF1101 for extended periods. The lighter weight makes it easier to maneuver in tight spaces. The heavier RP1800 offers more stability but requires more effort to control.

Soft start and features

Edge: Makita RF1101 2-1/4 HP Router

The Makita RF1101 includes a soft start feature for smooth start-ups. This reduces strain on the motor and your arms. The Makita RP1800 does not list a soft start feature. The RF1101 also has a sub base that accepts industry standard template guides. This adds convenience for template work. The RP1800 has quick release plunge depth adjustment with micro control. However, the soft start is a unique advantage for the RF1101.

Which Makita Router Suits Your Shop

Heavy duty plunge router users

Our pick: Makita RP1800 3-1/4 HP Plunge Router

The RP1800 offers 3-1/4 HP and reaches 22,000 RPM for aggressive material removal. Its plunge depth capacity extends from zero to 2-3/4 inches, allowing deep cuts. Linear ball bearings ensure smooth action, while quick release adjustments with micro control and three preset stops provide precision for complex joinery tasks.

Lightweight handheld routing needs

Our pick: Makita RF1101 2-1/4 HP Router

The RF1101 weighs only 7.1 pounds, making it much easier to handle than heavier models. Its 2-1/4 HP motor fits into a small 3-1/4 inch diameter housing. Variable speed control and electronic speed maintenance allow you to match RPMs to specific bits, while soft start reduces startup torque.

Template guide compatibility seekers

Our pick: Makita RF1101 2-1/4 HP Router

The RF1101 features a sub base that accepts industry standard template guides, streamlining your workflow for edge profiling. Its compact size and lighter weight improve maneuverability when following templates. The variable speed dial helps you adjust for different bit diameters without changing the tool, ensuring consistent results across various projects.

1
Makita RP1800 3-1/4 HP Plunge Router

Makita RP1800 3-1/4 HP Plunge Router

Best for: Deep plunge routing and heavy duty work

Horsepower
3-1/4 HP
Base Type
Plunge
Speed Range
22,000 RPM
Amperage
15 A
Dimensions
9.3 × 12.8 × 13.3 inches
Weight
13.2 pounds

The Makita RP1800 is a 3-1/4 HP plunge router with a 15-amp motor reaching 22,000 RPM. It features a 0 to 2-3/4 inch plunge depth capacity and linear ball bearings for smooth action. Weighing 13.2 pounds, it offers quick-release depth adjustment with micro control and three preset stops. This model suits users needing high power and precision for deep routing tasks.

Pros
  • 3-1/4 HP motor delivers 22,000 RPM
  • 0 to 2-3/4 inch plunge depth capacity
  • Linear ball bearings ensure smooth plunge action
  • Quick release depth adjustment with micro control
  • Three preset depth stops for added precision
Cons
  • Heavier 13.2 pound build compared to lighter alternatives
  • Higher 3-1/4 HP power may be excessive for light tasks
  • Larger physical dimensions at 13.3 inches height
Good fit if
  • You require deep plunge routing up to 2-3/4 inches
  • You need high speed for smooth routing in hardwoods
  • You prefer precise depth control with micro adjustment
Skip if
  • You need a lightweight router for overhead work
  • You only perform shallow edge profiling tasks
  • You prefer a compact tool for tight spaces

Verdict: Makita RP1800 3-1/4 HP Plunge Router fits professionals who need maximum power and deep plunge capacity for demanding routing jobs.

2
Makita RF1101 2-1/4 HP Router

Makita RF1101 2-1/4 HP Router

Best for: Users needing electronic speed control and compact handling

Horsepower
2-1/4 HP*
Dimensions
9 × 6 × 9.5 inches
Weight
7.1 pounds

The Makita RF1101 is a compact plunge router with 2-1/4 HP of power. It features electronic speed control to maintain constant speed under load and a soft start for smooth operation. Weighing 7.1 pounds, it has a 3-1/4 inch diameter motor housing for easy handling. This model suits users who need variable speed control and a sub base for template guides.

Pros
  • 2-1/4 HP motor power
  • Electronic speed control maintains constant speed
  • Soft start for smooth start-ups
  • Compact 3-1/4 inch diameter housing
  • Variable speed control dial
Cons
  • Lower horsepower than the 3-1/4 HP RP1800
  • Heavier at 7.1 pounds compared to lighter alternatives
Good fit if
  • You need electronic speed control for consistent performance
  • You prefer a compact motor housing for handling
  • You want soft start features for smooth operation
Skip if
  • You require more than 2-1/4 HP of power
  • You need a lighter tool under 7 pounds
  • You are looking for a 3-1/4 HP model

Verdict: Makita RF1101 2-1/4 HP Router is a solid choice for users who prioritize electronic speed control and a compact design over raw horsepower. It fits those who need reliable performance in a manageable form factor.

Specifications side by side

SpecMakita RP1800 3-1/4 HP Plunge RouterMakita RF1101 2-1/4 HP Router
Horsepower3-1/4 HP2-1/4 HP*
Base TypePlunge–
Speed Range22,000 RPM–
Amperage15 A–
Motor Power4 HP4 HP
Dimensions9.3 × 12.8 × 13.3 inches9 × 6 × 9.5 inches
Weight13.2 pounds7.1 pounds
SizeOne SizeOne Size
ColorFactoryFactory
ModelRP1800RF1101

Frequently asked questions

Is the Makita RP1800 better for deep plunge work?

Yes. The RP1800 is designed for heavy duty tasks. It offers 3-1/4 HP for aggressive material removal. Its plunge depth capacity reaches 2-3/4 inches. This allows for deep cuts in demanding routing jobs. The linear ball bearings ensure smooth action during these deep operations.

Does the Makita RF1101 have electronic speed control?

Yes. The RF1101 features electronic speed control. This helps maintain consistent performance under varying loads. It provides 2-1/4 HP of power. The compact design makes it easier to handle for users who prioritize control over raw horsepower. It is a solid choice for manageable form factors.

How much heavier is the RP1800 than the RF1101?

The RP1800 weighs 13.2 pounds. The RF1101 weighs 7.1 pounds. The difference is 6.1 pounds. This significant weight difference affects handling. The heavier RP1800 suits stationary or heavy duty use. The lighter RF1101 is better for users needing a compact and manageable tool.

Which router is more compact for tight spaces?

The RF1101 is more compact. It measures 6 inches wide and 9 inches long. The RP1800 is wider at 12.8 inches and longer at 9.3 inches. The smaller footprint of the RF1101 makes it easier to maneuver in tight areas. It fits users who need a manageable form factor.

Can the RP1800 handle heavy duty routing tasks?

Yes. The RP1800 is built for heavy duty work. It delivers 3-1/4 HP of power. This output is ideal for aggressive material removal. The tool fits professionals who need maximum power. Its design supports demanding routing jobs that require significant torque and depth capacity.

Is the RF1101 suitable for users who need reliability?

Yes. The RF1101 is described as a solid choice. It prioritizes electronic speed control and compact design. It offers 2-1/4 HP for reliable performance. Users who need consistent results in a manageable package will find it suitable. It balances power with ease of handling for various tasks.

What is the main difference in horsepower between the two?

The RP1800 has 3-1/4 HP. The RF1101 has 2-1/4 HP. The RP1800 provides more power for heavy cutting. The RF1101 offers less power but focuses on control. Both share a 4 HP motor rating in attributes, but the output specs show the RP1800 is stronger.

Which model is better for professionals needing maximum power?

The RP1800 is better for professionals. It offers 3-1/4 HP and a 2-3/4 inch plunge depth. It is designed for maximum power and deep plunge capacity. The RF1101 is better for those who prioritize electronic speed control. Choose the RP1800 for demanding and aggressive routing jobs.

See also

Where to buy

at Amazon

View deal

Price taken from the listing when this page was written and it can change at any time. We may earn a commission if you buy through this link.