Makita XT269T 18V LXT Lithium-Ion vs Makita 1-Inch AVT D-Handle Rotary (2026): Key Differences
Compare the Makita XT269T 18V LXT Lithium-Ion vs 1 inch avt d handle rotary using published specs. See key differences in power, weight, and intended use cases.
By GaugeKit Editorial Team 7 min read
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The makita xt269t 18v lxt lithium ion vs 1 inch avt d handle rotary comparison highlights two distinct tool categories. Both are Makita products designed for durability and performance. The XT269T is a cordless 2-tool combo kit featuring brushless motors. The HR2641 is a corded rotary hammer with anti-vibration technology. You need to decide between portable versatility and heavy-duty masonry drilling power based on your specific job requirements.
Power Source
Cordless 18V
Corded 8 Amp
Motor Type
Brushless
8 Amp
Chuck Type
1/2" Hammer Driver-Drill
SDS-Plus
Kit Size
2-Tool Kit
Bare Tool
Battery Capacity
5.0Ah
Not listed
Choose the first if
- You need a versatile kit for general drilling and driving tasks
- You prefer cordless convenience with brushless motor efficiency
- You want to drill into wood, metal, or light masonry with a standard chuck
Choose the second if
- You require high impact energy for drilling into concrete or masonry
- You need SDS-Plus bit compatibility for masonry work
- You want anti-vibration technology for reduced user fatigue during heavy use
Verdict
Choose the XT269T if you need a portable, cordless solution for general construction and assembly tasks. Select the HR2641 if your work involves frequent drilling into concrete or masonry where high impact energy and SDS-Plus compatibility are essential.
Makita XT269T vs HR2641 Comparison
Power source
Edge: Tie
The Makita XT269T is a cordless system powered by 18V LXT Lithium-Ion batteries. This setup offers mobility without a power cord, allowing you to work in areas without nearby outlets. The Makita HR2641 is a corded tool with an 8-amp motor. It requires a constant connection to electrical power. While the XT269T provides freedom of movement, the HR2641 ensures continuous power without worrying about battery depletion. You must choose between the convenience of cordless operation and the consistent output of a direct electrical connection. Each approach suits different job site conditions and workflow preferences.
Motor technology
Edge: Makita 18V Brushless 2-Tool Kit
The XT269T features brushless motors in both the hammer driver-drill and the impact driver. These electronically controlled motors optimize battery energy use, potentially extending run time by up to 50% per charge. They also run cooler and offer longer life by eliminating carbon brushes. The HR2641 uses a traditional 8-amp corded motor. It delivers 2.1 ft-lbs of impact energy for demanding applications. The brushless design in the XT269T focuses on efficiency and battery management, while the HR2641 relies on raw amperage for steady performance. Your choice depends on whether you prioritize energy efficiency or direct corded power.
Chuck compatibility
Edge: Makita 1-Inch AVT D-Handle Rotary Hammer
The Makita HR2641 uses an SDS-Plus chuck, which accepts 1-inch bits designed for rotary hammering. This system allows for quick bit changes and efficient power transfer for drilling into masonry. The XT269T includes a 1/2-inch hammer driver-drill. It uses standard keyless chucks for general drilling and driving tasks. The SDS-Plus system on the HR2641 is specialized for heavy-duty masonry work, offering better impact transmission. The 1/2-inch chuck on the XT269T is more versatile for general hardware and wood applications. You should select the tool based on the specific bit types required for your projects.
Included tools
Edge: Makita 18V Brushless 2-Tool Kit
The XT269T is sold as a 2-tool combo kit. It includes a variable 2-speed hammer driver-drill and a variable speed impact driver. This provides two distinct functions in one package. The HR2641 is listed as a bare tool or kit only, focusing on a single rotary hammer unit. The XT269T offers more versatility for general construction tasks by including both drilling and driving capabilities. The HR2641 is a single-purpose tool optimized for masonry. If you need multiple functions, the XT269T provides greater value. If you only need a rotary hammer, the HR2641 is a dedicated solution.
Weight and balance
Edge: Makita 1-Inch AVT D-Handle Rotary Hammer
The XT269T kit weighs 13 pounds, including batteries. The individual tools are lightweight, with the drill weighing 4.2 pounds and the impact driver 3.3 pounds. The HR2641 weighs 11.5 pounds. It features an ergonomic D-shaped handle with a rubberized soft grip. The HR2641 also includes Anti-Vibration Technology (AVT) to reduce vibration by moving a counterweight. This makes it more comfortable for extended use in heavy masonry work. The XT269T tools are lighter for general handling but lack the specialized vibration dampening of the rotary hammer. Your comfort will depend on the duration and intensity of the work.
Impact capability
Edge: Makita 1-Inch AVT D-Handle Rotary Hammer
The HR2641 delivers 2.9 Joules of impact energy, designed for drilling into concrete and masonry. It offers three modes: rotation only, hammering with rotation, and chipping only. This makes it suitable for demanding construction tasks. The XT269T drill delivers 530 in-lbs of max torque. While it has a hammer function, it is not designed for heavy masonry drilling. The HR2641 has superior impact energy for breaking through hard materials. The XT269T is better for light hammering and general fastening. You should choose the HR2641 if you frequently drill into concrete.
Which Makita Tool Fits Your Job
Users needing portable drilling and driving
Our pick: Makita 18V Brushless 2-Tool Kit
The XT269T kit provides cordless freedom with 18V brushless motors. You get a hammer driver-drill with 530 inch-pounds of torque and an impact driver with 1,500 pound-feet of torque. The 5.0Ah batteries extend run time. This setup is ideal for general construction tasks where mobility matters more than raw hammering power.
Professionals drilling into concrete or masonry
Our pick: Makita 1-Inch AVT D-Handle Rotary Hammer
The HR2641 is built for tough materials with an 8-amp motor delivering 2.9 joules of impact energy. It accepts SDS-Plus bits for a 1-inch drilling capacity. Anti-Vibration Technology reduces fatigue during long use. The three-mode operation lets you switch between drilling, hammering, and chipping, making it essential for heavy-duty masonry work.
Workers requiring versatile multi-mode functionality
Our pick: Makita 1-Inch AVT D-Handle Rotary Hammer
This rotary hammer offers three distinct operating modes: rotation only, hammer with rotation, and chipping only. The torque-limiting clutch protects gears if the bit binds. The ergonomic D-handle with soft grip improves control. If your projects involve varied masonry tasks or require specific chipping capabilities, this tool provides the necessary versatility and durability.
Makita 18V Brushless 2-Tool Kit
Best for: General drilling and driving tasks
- Voltage
- 18V
- Motor Type
- BL Brushless
- Battery Capacity
- 5.0Ah
- Kit Size
- 2-Tool
- Power Source
- Cordless
- Configuration
- Kit
The Makita XT269T is a cordless 2-tool kit featuring an 18V brushless motor system. It includes a 1/2-inch hammer driver-drill with 530 in-lbs of torque and a 3,400 RPM impact driver. The kit comes with a 5.0Ah battery. This setup offers efficient energy use and variable speeds. It suits users who need portable power for drilling and driving tasks without cord restrictions.
- Brushless motor optimizes battery energy for up to 50% longer run time
- Hammer driver-drill delivers 530 in-lbs of max torque
- Impact driver reaches 3,400 RPM and 3,600 IPM
- Weighs only 4.2 pounds with battery for the drill
- Hammer driver-drill has a 1/2-inch chuck, which is smaller than the 1-inch SDS-Plus capacity of the competing rotary hammer
- Impact driver lacks a hammer function, limiting it to driving and light drilling compared to the rotary hammer's masonry capability
- Kit weighs 13 pounds total, which is bulkier than a single handheld tool
- You need a versatile 2-tool set for general construction and woodworking
- You prefer cordless flexibility for jobsites without power outlets
- You want brushless motors for extended tool life and efficiency
- You require heavy-duty masonry drilling with a 1-inch SDS-Plus rotary hammer
- You are looking for a single, dedicated hammer drill rather than a combo kit
- You need a tool with a larger chuck capacity than 1/2-inch
Verdict: Makita XT269T 18V Brushless Combo Kit is a balanced choice for DIYers and contractors who value portability and brushless efficiency for general drilling and driving tasks. It fits users who need two tools in one kit rather than a specialized heavy-duty rotary hammer.
Makita 1-Inch AVT D-Handle Rotary Hammer
Best for: Heavy-duty concrete drilling and chipping
- Impact Energy
- 2.1 ft-lbs / 2.9 J
- Chuck Type
- SDS-Plus
- Drilling Capacity
- 1"
- Operating Modes
- Rotation, hammer with rotation, chip
- Amperage
- 8 A
- Chuck Size
- 1 Inch
This Makita HR2641 is a corded rotary hammer built for heavy-duty drilling and chipping. It features an 8-amp motor delivering 2.1 ft-lbs of impact energy. The SDS-Plus chuck accepts standard bits for 1-inch concrete work. Anti-Vibration Technology reduces fatigue during extended use. You will appreciate the three operating modes for versatile applications. This tool suits professionals needing raw power and durability for demanding construction tasks.
- 8-amp motor provides 2.1 ft-lbs of impact energy
- Anti-Vibration Technology reduces operator fatigue
- Three operating modes for drilling, hammering, and chipping
- Torque-limiting clutch protects internal gears
- Ergonomic D-handle with rubberized soft grip
- Heavier build at 11.5 pounds compared to lighter cordless options
- Requires a dedicated power outlet due to corded design
- Larger footprint with 19.3-inch length limits tight-space access
- You need maximum impact energy for large-diameter holes
- You work in environments with easy access to power outlets
- You require durable tools for daily professional use
- You prefer cordless tools for greater mobility
- You need to drill in tight spaces with limited reach
- You only require light-duty drilling tasks
Verdict: Makita 1-Inch AVT Rotary Hammer delivers consistent power for heavy concrete work. It fits professionals who prioritize durability and impact force over portability.
Specifications side by side
| Spec | Makita 18V Brushless 2-Tool Kit | Makita 1-Inch AVT D-Handle Rotary Hammer |
|---|---|---|
| Impact Energy | – | 2.1 ft-lbs / 2.9 J |
| Chuck Type | – | SDS-Plus |
| Drilling Capacity | – | 1" |
| Operating Modes | – | Rotation, hammer with rotation, chip |
| Voltage | 18V | – |
| Amperage | – | 8 A |
| Motor Type | BL Brushless | – |
| Chuck Size | – | 1 Inch |
| Battery Capacity | 5.0Ah | – |
| Kit Size | 2-Tool | – |
| Power Source | Cordless | – |
| Configuration | Kit | Bare Tool |
| Set Type | – | Tool Only |
| Dimensions | 16.7 × 11.2 × 6.5 inches | 19.3 × 4.37 × 13 inches |
| Weight | 13 pounds | 11.5 pounds |
| Size | Kit Only | 1" |
| Color | Teal | Black and Cyan |
| Model | XT269T | HR2641 |
Frequently asked questions
Can the Makita XT269T drill into concrete?
Yes, the XT269T includes a hammer driver-drill capable of handling light concrete work. It is part of a 2-tool kit designed for general drilling and driving tasks. While it offers portability with 18V brushless motors, it is not a heavy-duty rotary hammer. You should use it for masonry holes rather than structural demolition or large-diameter core drilling.
What is the difference in weight between the two tools?
The XT269T kit weighs 13 pounds, while the HR2641 rotary hammer weighs 11.5 pounds. The kit includes two tools and batteries, making it heavier overall. The rotary hammer is sold as a bare tool. This weight difference reflects the kit contents versus the single unit. You should consider how you will carry the equipment to your work site.
Does the rotary hammer use SDS-Plus chucks?
Yes, the Makita HR2641 features an SDS-Plus chuck type. This standard allows you to use a wide range of 1-inch compatible bits for drilling and chipping. The XT269T uses standard keyless chucks for its drill and impact driver. You must select the correct bit system for each tool to ensure secure attachment and safe operation.
Is the XT269T suitable for professional contractors?
The XT269T is a balanced choice for DIYers and contractors who value portability. It features brushless motors for efficiency in general tasks. The kit provides two essential tools for driving and drilling. However, it is not designed for specialized heavy-duty rotary hammer work. You should choose this kit if you need versatility and cordless freedom for daily jobs.
How large are the batteries included in the kit?
The Makita XT269T comes with 5.0Ah battery capacity units. These provide sufficient runtime for typical drilling and driving applications. The rotary hammer is sold as a bare tool without batteries. You will need to purchase compatible 18V LXT batteries separately for the HR2641. The 5.0Ah capacity offers a good balance of power and run time for most tasks.
Can I use the HR2641 for chipping work?
Yes, the HR2641 is best for heavy-duty concrete drilling and chipping. It delivers consistent power for demanding demolition tasks. The 1-inch chuck size supports large bits for breaking concrete. This tool is designed for professionals who prioritize durability and impact force. You should not use it for precision woodworking or light household repairs.
What are the dimensions of the rotary hammer?
The Makita HR2641 measures 19.3 inches in length, 4.37 inches in width, and 13 inches in height. These dimensions allow for a comfortable grip with the D-handle design. The compact body helps you maneuver in tight spaces. You should compare these measurements to your workspace to ensure adequate room for operation and bit changes.
Are both tools part of the same battery system?
Yes, both tools operate on the 18V LXT Lithium-Ion platform. The XT269T includes batteries, while the HR2641 requires separate purchase. You can use the same 18V batteries for both if you buy them for the rotary hammer. This compatibility allows you to share power sources across multiple Makita cordless tools in your collection.
See also
Where to buy
at Amazon
Price taken from the listing when this page was written and it can change at any time. We may earn a commission if you buy through this link.
More Rotary Hammers
See the sectionGet our picks by email
New reviews and the prices we spotted, once a week.






