Skip to content
Most covered
Newsletter

Table Saws

DEWALT 8-1/4-Inch Compact Jobsite Table Alternatives: 6 Similar Picks Compared

Find the right saw by comparing 6 alternatives to the DEWALT 8 1 4 inch compact jobsite table. We review motor power, blade diameter, and fence precision to guide your selection.

By GaugeKit Editorial Team 6 min read

As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

You are looking for dewalt 8 1 4 inch compact jobsite table alternatives. The original DEWALT DWE7485 offers a 15 Amp motor and a rack and pinion fence system for precise cuts. It weighs 54 pounds and fits into a compact footprint. These specs make it suitable for contractors who need accuracy and durability on active sites. However, you might want a different blade size, more rip capacity, or a dedicated stand for stability. Some users prioritize mobility over precision, while others need heavier duty motors for thick materials. The alternatives in this list were chosen because their specifications overlap with the original. Each option shares key traits like portable form factors or similar amperage ratings. You can compare these picks to find the tool that matches your specific workflow. This guide focuses strictly on published data to help you decide. We examine motor power, blade diameter, and physical dimensions. You will see how each saw handles sheet goods and framing tasks. The goal is to provide clear, factual comparisons without hype. Your choice depends on which specs matter most for your projects. Read on to see how each model stacks up against the DEWALT baseline.

How each alternative compares

Evolution 10-Inch Table Saw with Wheeled Stand

The Evolution 10-Inch saw swaps the DEWALT’s 8-1/4-inch blade for a 10-inch option. This change allows for cutting thicker materials and wider sheets. It also includes a wheeled stand, which improves site mobility compared to the DEWALT’s roll cage base. However, the Evolution is heavier and wider. You gain cutting capacity but lose some compact storage ease. This pick suits contractors who cut metal and wood and need frequent transport. If you prioritize fence precision and a smaller footprint, the original DEWALT remains the better choice for tight spaces.

SKIL TS6338 8-1/4-Inch Jobsite Saw

The SKIL TS6338 matches the DEWALT’s 8-1/4-inch blade size and 15 Amp motor. It offers a similar portable form factor for jobsite use. The SKIL model is taller at 17.2 inches compared to the DEWALT’s 13 inches. This height difference may affect your cutting comfort and table stability. The SKIL provides a budget-friendly option for framing work and sheet goods. You get comparable cutting width but potentially less durable construction. Choose this if you need a lighter cost option for smaller jobs. If you value the rack and pinion fence accuracy and metal base durability, stick with the DEWALT DWE7485.

DEWALT 8-1/4-Inch Table Saw with Stand

This DEWALT model includes the same 8-1/4-inch blade and 15 Amp motor as the original. The key difference is the included stand, which raises the height to 26.8 inches. This provides a more ergonomic working position than the DEWALT’s 13-inch height. The unit weighs 66 pounds, making it heavier and less portable than the 54-pound original. You gain stability and height but lose the ability to easily carry the saw on its own base. This pick fits professionals who prioritize sheet goods handling and fence precision over minimal weight and compact storage.

Bosch 10-Inch Jobsite Table Saw with Wheeled Stand

The Bosch saw features a 10-inch blade and a powerful 4 HP motor, significantly outperforming the DEWALT’s 15 Amp motor. It includes a wheeled stand for enhanced mobility and stability. The unit weighs 103 pounds, which is nearly double the DEWALT’s 54 pounds. You gain substantial power and cutting capacity for heavy-duty ripping. However, you sacrifice portability and compact size. This model suits users who need robust performance and dedicated stand support. If you prioritize a lightweight, compact tool for frequent moves, the original DEWALT is the more practical choice for your jobsite.

POWSTR 10-Inch Table Saw with Stand

The POWSTR saw offers a 10-inch blade and a 5000 RPM speed, which is faster than typical jobsite saws. It includes a stand for immediate use. The unit weighs significantly more than the DEWALT and has a different footprint. You gain high speed and stability for woodworking tasks. However, you lose the compact nature and specific rack and pinion fence system of the DEWALT. This pick fits users who value stability and high speed over a small footprint. If you need the precise fence adjustments and lighter weight of the original DEWALT, this larger saw may not suit your portable needs.

VEVOR 10-Inch Compact Jobsite Table Saw

The VEVOR saw provides a 10-inch blade and a 15 Amp motor. It features a wide 25-inch table, offering more support for sheet goods than the DEWALT’s smaller surface. The unit is 120V compatible and portable. You gain extra table space and a larger cutting diameter. However, you lose the compact dimensions and specific fence system of the DEWALT. The VEVOR is a solid choice for users who want a wide table in a portable package. If you prioritize the precise rack and pinion fence and smaller footprint of the original DEWALT, this wider saw may be too bulky for your transport requirements.

#ProductBest forPrice
1DEWALT 8-1/4-Inch Compact Jobsite Table Saw Best overallaccurate ripping on active jobsites
2Evolution 10-Inch Table Saw with Wheeled Stand Best premiumMulti-material cutting and site mobility
3SKIL TS6338 8-1/4-Inch Jobsite Saw Best budgetportable sheet goods and framing work
4DEWALT 8-1/4-Inch Table Saw with Stand Also greatRipping full 4×8 sheets with a stable stand
5Bosch 10-Inch Jobsite Table Saw with Wheeled Stand Best 4 hpHeavy-duty ripping and stable mobility
6POWSTR 10-Inch Table Saw with Stand Best 5000 rpmusers needing a stable 10-inch saw with stand
7VEVOR 10-Inch Compact Jobsite Table Saw Best 120vportable woodworking with wide table space
1Best overall
DEWALT 8-1/4-Inch Compact Jobsite Table Saw

DEWALT 8-1/4-Inch Compact Jobsite Table Saw

Best for: accurate ripping on active jobsites

Blade Diameter
8-1/4 in.
Rip Capacity
24.5 in.
Motor Power
15 Amp
Fence System
Rack & pinion
Application
Jobsite
Form Factor
Portable

This 15 Amp, 8-1/4-inch table saw offers 24.5 inches of rip capacity. Its rack and pinion fence rails ensure fast, smooth adjustments. The metal roll cage base adds durability for jobsite use. You get on-board storage for accessories. This compact portable saw fits users who need reliable power in a smaller footprint without sacrificing fence accuracy.

Pros
  • 15 Amp motor provides solid cutting power
  • Rack and pinion fence rails for accurate adjustments
  • 24.5-inch rip capacity handles standard sheet goods
  • Metal roll cage base for jobsite durability
  • On-board storage keeps accessories organized
Cons
  • 8-1/4-inch blade diameter cuts less material than 10-inch competitors
  • 54-pound weight is heavier than some compact alternatives
  • 24.5-inch rip capacity is lower than 50-inch models
Good fit if
  • You need a durable saw for active jobsites
  • You value precise fence adjustments via rack and pinion
  • You require a compact footprint for transport
Skip if
  • You need to cut wide panels beyond 24.5 inches
  • You prefer a lighter saw under 50 pounds
  • You require a 10-inch blade for deeper cuts

Verdict: DEWALT 8-1/4-Inch Compact Jobsite Table Saw delivers accurate cuts through its rack and pinion fence system. It suits contractors who prioritize fence precision and build durability over maximum blade size.

2Best premium
Evolution 10-Inch Table Saw with Wheeled Stand

Evolution 10-Inch Table Saw with Wheeled Stand

Best for: Multi-material cutting and site mobility

Blade Diameter
10 in
Rip Capacity
26 in
Motor Power
15 A
Fence System
Rack and pinion
Stand Type
Wheeled stand
Amperage
15 Amp

The Evolution R10TBLX is a 10-inch portable jobsite table saw with a wheeled stand. It features a 15-amp motor and a 26-inch rip capacity. The rack and pinion fence ensures precise alignment. This model includes a dado plate and zero-clearance throat plate. It suits users who cut wood and metals. The included stand aids transport and stability on site.

Pros
  • 10-inch blade diameter for larger cuts
  • 15-amp motor with soft start
  • Rack and pinion fence system
  • Includes dado plate for grooves
  • 26-inch rip capacity
Cons
  • Smaller 26-inch rip capacity compared to larger alternatives
  • Heavier steel frame build
  • Fewer bevel settings with 0–45 degree range
Good fit if
  • You need to cut mild steel or aluminum
  • You want a wheeled stand for transport
  • You require a dado plate for grooves
Skip if
  • You prefer an 8-1/4-inch compact saw
  • You need a 48-degree bevel range
  • You want a folding stand instead of wheeled

Verdict: Evolution 10-Inch Jobsite Table Saw fits professionals who cut metal and wood. It offers a 10-inch blade and wheeled stand for site mobility. Users needing wider rip capacity should look elsewhere.

3Best budget
SKIL TS6338 8-1/4-Inch Jobsite Saw

SKIL TS6338 8-1/4-Inch Jobsite Saw

Best for: portable sheet goods and framing work

Blade Diameter
8-1/4 in
Rip Capacity
24.5 in
Motor Power
15 A
Power Source
Corded
Fence System
Rack and pinion
Stand Type
Folding stand

The SKIL TS6338-00 is a corded 15-amp jobsite saw with an 8-1/4-inch blade. It offers a 24.5-inch rip capacity and a 2-1/2-inch depth of cut. The rack and pinion fence ensures parallel alignment for accurate cuts. The folding stand aids transport. This compact unit suits users needing portable sheet goods handling.

Pros
  • 15-amp motor provides power for framing and plywood
  • Rack and pinion fence system for quick, accurate adjustments
  • 24.5-inch rip capacity handles sheet materials
  • 2-1/2-inch depth of cut at 0 degrees
Cons
  • 8-1/4-inch blade diameter is smaller than 10-inch competitors
  • Folding stand offers less stability than wheeled stands
  • 24.5-inch rip capacity is lower than full-size alternatives
Good fit if
  • You need a portable saw for framing tasks
  • You require a rack and pinion fence for accuracy
  • You value compact storage with a folding stand
Skip if
  • You need a 10-inch blade for thicker stock
  • You prefer a wheeled stand for heavy jobsites
  • You require a rip capacity exceeding 24.5 inches

Verdict: SKIL 8-1/4-Inch Portable Table Saw fits users who prioritize portability and fence accuracy over maximum cutting depth. It serves those handling sheet goods on smaller jobsites.

4Also great
DEWALT 8-1/4-Inch Table Saw with Stand

DEWALT 8-1/4-Inch Table Saw with Stand

Best for: Ripping full 4×8 sheets with a stable stand

Blade Diameter
8-1/4 inch
Rip Capacity
24.5 in.
Fence System
Rack and pinion
Form Factor
Portable
Dimensions
26.5 × 17.1 × 26.8 inches
Weight
66 pounds

This DEWALT model combines an 8-1/4-inch blade with a wheeled stand for portable jobsite use. It offers 24.5 inches of rip capacity, allowing you to handle full 4×8 sheets of plywood or OSB. The rack and pinion fence system ensures fast and accurate adjustments. At 66 pounds, the unit is heavy but stable. It suits contractors who need reliable cutting precision and easy transport without sacrificing rip width.

Pros
  • 24.5-inch rip capacity for full sheet goods
  • Rack and pinion fence for smooth adjustments
  • Blade Brake safety feature
  • Power-Loss reset prevents accidental restarts
Cons
  • 8-1/4-inch blade diameter is smaller than the 10-inch options on this list
  • 66-pound weight is heavier than the base saw units in this comparison
Good fit if
  • You need to rip full 4×8 sheets of plywood
  • You prefer a wheeled stand for easier site transport
  • You value fence accuracy for precise cuts
Skip if
  • You require a 10-inch blade for maximum cutting depth
  • You need a lighter tool for frequent carrying
  • You prefer a smaller footprint for tight storage

Verdict: DEWALT 8-1/4-Inch Table Saw with Stand provides ample rip capacity and a robust stand for jobsite stability. It fits professionals who prioritize sheet goods handling and fence precision over maximum blade diameter.

5Best 4 hp
Bosch 10-Inch Jobsite Table Saw with Wheeled Stand

Bosch 10-Inch Jobsite Table Saw with Wheeled Stand

Best for: Heavy-duty ripping and stable mobility

Blade Diameter
10 Inch
Rip Capacity
32-1/8 Inch
Motor Power
15 Amp, 4 HP
Fence System
Rack and pinion
Stand Type
Gravity-Rise Wheeled Stand
Application
Jobsite

This Bosch portable jobsite table saw features a 10-inch blade and a 15-amp motor rated at 4 HP. It delivers 3,800 RPM and offers a 32-1/8-inch rip capacity. The unit includes a Gravity-Rise wheeled stand for transport. You get a rack and pinion fence for precise adjustments and a convenience brake for safety. This setup suits users who need high power and a sturdy, mobile base for demanding jobsite tasks.

Pros
  • 15-amp motor provides 4 HP of power
  • 32-1/8-inch rip capacity handles wide stock
  • Gravity-Rise wheeled stand aids mobility
  • Rack and pinion fence ensures accurate alignment
Cons
  • 103-pound weight is heavier than compact 8-1/4-inch alternatives
  • 10-inch blade size exceeds the 8-1/4-inch format of the guide's primary comparison model
  • 3,800 RPM speed is lower than some 10-inch competitors running at 5,000 RPM
Good fit if
  • You need a 4 HP motor for dense hardwoods
  • You want a wheeled stand for easy site transport
  • You require a 32-1/8-inch rip capacity for wide panels
Skip if
  • You prefer a lightweight saw under 70 pounds
  • You strictly need an 8-1/4-inch blade diameter
  • You want a higher 5,000 RPM motor speed

Verdict: Bosch 10-Inch Portable Table Saw with Wheeled Stand delivers serious power and stability for pros who prioritize cutting capacity and mobility over minimal weight. It fits users who need a robust 4 HP motor and a dedicated stand for frequent jobsite moves.

6Best 5000 rpm
POWSTR 10-Inch Table Saw with Stand

POWSTR 10-Inch Table Saw with Stand

Best for: users needing a stable 10-inch saw with stand

Blade Diameter
10 in
Motor Power
15 A
Stand Type
Rugged stand
Amperage
15 Amp
Speed
5000 RPM
Intended Use
Woodworking, DIY

The POWSTR 10-Inch table saw features a 15-amp motor spinning at 5000 RPM. It includes a rugged stand for stability and offers 0-45° bevel and 90° crosscut capabilities. The 10-inch blade diameter accommodates standard jobsite tasks. This portable unit suits DIYers and carpenters needing a reliable workhorse for hardwoods and plywood. Its 5000 RPM speed sets it apart from competitors on this list.

Pros
  • 15-amp pure copper motor delivers 5000 RPM for fast cutting
  • Includes a rugged stand for enhanced stability and vibration reduction
  • 10-inch blade diameter handles lumber and plywood effectively
  • Offers 0-45° bevel and 90° crosscut versatility
Cons
  • 5000 RPM speed is lower than the 5500 RPM typical of 8-1/4-inch compact models
  • 10-inch blade requires more space than 8-1/4-inch alternatives
  • Heavier build due to the included rugged stand
Good fit if
  • You need a 10-inch blade for wider cuts
  • You want a stable setup with an included stand
  • You prioritize high RPM for hardwood cutting
Skip if
  • You require the maximum 5500 RPM speed
  • You need a compact 8-1/4-inch blade for tight spaces
  • You prefer a lighter unit without a stand

Verdict: POWSTR 10-Inch 15A Jobsite Table Saw fits users who value stability and high speed over compact size. It is ideal for those who want a ready-to-use stand and do not need the smallest footprint available.

7Best 120v
VEVOR 10-Inch Compact Jobsite Table Saw

VEVOR 10-Inch Compact Jobsite Table Saw

Best for: portable woodworking with wide table space

Blade Diameter
10 in
Motor Power
15 A
Voltage
120 V
Fence System
Parallel fence
Amperage
15 Amp
Intended Use
Woodworking

This VEVOR table saw offers 15-amp power and a 10-inch blade. It runs at 4500 RPM for efficient cutting. The 25-inch table provides ample workspace. You get a parallel fence for accurate rip cuts. The unit weighs less than larger competitors. It fits in a car trunk. This saw suits users needing portable power.

Pros
  • 15-amp motor delivers 4500 RPM
  • 10-inch blade diameter for standard cuts
  • 25-inch table width for large boards
  • Adjustable parallel fence with guide rails
  • Compact dimensions fit in car trunk
Cons
  • Lower 4500 RPM speed than 5000 RPM competitors
  • Heavier build than lightweight folding models
  • No integrated wheeled stand included
Good fit if
  • You need a 120V portable saw
  • You prioritize table width over weight
  • You work on indoor and outdoor projects
Skip if
  • You require a wheeled stand
  • You need higher than 4500 RPM speed
  • You prefer a brand with a warranty

Verdict: VEVOR 10-Inch 15A Portable Jobsite Table Saw fits users who want a wide 25-inch table and 15-amp power in a portable package. It is a solid choice for those who can transport the unit without a stand.

Specifications side by side

SpecDEWALT 8-1/4-Inch Compact Jobsite Table SawEvolution 10-Inch Table Saw with Wheeled StandSKIL TS6338 8-1/4-Inch Jobsite SawDEWALT 8-1/4-Inch Table Saw with StandBosch 10-Inch Jobsite Table Saw with Wheeled StandPOWSTR 10-Inch Table Saw with StandVEVOR 10-Inch Compact Jobsite Table Saw
Blade Diameter8-1/4 in.10 in8-1/4 in8-1/4 inch10 Inch10 in10 in
Rip Capacity24.5 in.26 in24.5 in24.5 in.32-1/8 Inch––
Motor Power15 Amp15 A15 A–15 Amp, 4 HP15 A15 A
Power Source––Corded––––
Voltage––––––120 V
Fence SystemRack & pinionRack and pinionRack and pinionRack and pinionRack and pinion–Parallel fence
Stand Type–Wheeled standFolding stand–Gravity-Rise Wheeled StandRugged stand–
Amperage15 Amp15 Amp15 Amp–15 Amp15 Amp15 Amp
Speed–––––5000 RPM–
Intended Use–––––Woodworking, DIYWoodworking
ApplicationJobsiteJobsiteJobsite–JobsiteJobsiteJobsite
Form FactorPortablePortablePortablePortablePortablePortablePortable
Dimensions22.8 × 22.8 × 13 inches29 × 29 × 15 inches26 × 22.8 × 17.2 inches26.5 × 17.1 × 26.8 inches28.1 × 27.8 × 13.5 inches22 × 14 × 26 inches25.6 × 24.1 × 11.8 inches
Weight54 pounds––66 pounds103 pounds––
SizeOne Size10"–One Size10 in–10inch-1800W
ColorYellowBlack–Yellow/BlackBosch BlueWith StandOrange
ModelDWE7485R10TBLXTS6338-00DWE7485WSGTS15-102541M1H-ZP7-254-1

Frequently asked questions

Is the Evolution saw better for cutting metal?

Yes, the Evolution 10-Inch Table Saw is designed for multi-material cutting. It handles both metal and wood effectively. This makes it a strong choice if you frequently switch between material types on site. The other options in this list focus primarily on wood cutting tasks.

Which saw has the highest motor speed?

The POWSTR 10-Inch Table Saw offers a speed of 5000 RPM. This is the highest rated speed among the listed alternatives. It suits users who value high rotational speed for their cuts. Most other saws in this group do not specify their RPM in the provided data.

Does the Bosch saw come with a stand?

Yes, the Bosch 10-Inch Jobsite Table Saw includes a wheeled stand. It weighs 103 pounds, making it the heaviest option here. The dedicated stand provides stability for heavy-duty ripping tasks. You get a robust setup designed for frequent jobsite moves without needing a separate purchase.

Which model is the most portable?

The DEWALT 8-1/4-Inch Compact Jobsite Saw is the lightest at 54 pounds. It measures 22.8 inches wide and 22.8 inches long. This compact footprint and low weight make it easy to carry. It is ideal for contractors who prioritize fence precision and build durability over maximum blade size.

What is the widest table surface available?

The VEVOR 10-Inch Compact Jobsite Table Saw features a 25.6-inch length. This provides a wide table space for portable woodworking. It offers 15-amp power in a portable package. This width helps support larger sheets of material compared to the narrower tops found on other compact models in this list.

Can I rip full 4×8 sheets with the DEWALT stand model?

The DEWALT 8-1/4-Inch Table Saw with Stand provides ample rip capacity. It includes a robust stand for jobsite stability. This setup fits professionals who prioritize sheet goods handling. It allows for precise cuts on large panels without sacrificing the compact nature of the 8-1/4-inch blade design.

Is there a budget-friendly 8-1/4-inch option?

The SKIL TS6338 8-1/4-Inch Jobsite Saw is marked as the best budget pick. It serves users handling sheet goods on smaller jobsites. It prioritizes portability and fence accuracy. This model is a solid choice if you need a lightweight, accurate tool without the higher cost of premium alternatives.

See also

Where to buy

at Amazon

View deal

Price taken from the listing when this page was written and it can change at any time. We may earn a commission if you buy through this link.